Check this out! A Fancy Homer Simpson!

We are including Two Versions, the finished and colored 3mf file ( A1 Selected, just change to desired printer).

The Second version is just the STL, the information will be below

If changing size, only change X and Y. Do not change Z

We included 2 3MF files, 1 for AMS and 1 For Non AMS that features Pauses.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x165.33mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

 PLA BambuLab Basic Black Transmission Distance: 0.6

 PLA BambuLab Basic Red Transmission Distance: 4

 PLA BambuLab Basic Blue Gray Transmission Distance: 3

 PLA BambuLab Basic Yellow Transmission Distance: 6

 PLA BambuLab Basic Blue Transmission Distance: 4

 PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 6 unique filaments

Swap Instructions:

 Start with Black

 At layer #9 (0.8mm) swap to Red

 At layer #13 (1.12mm) swap to Blue Gray

 At layer #14 (1.2mm) swap to Yellow

 At layer #19 (1.6mm) swap to Blue

 At layer #25 (2.08mm) swap to Jade White for the rest.