tracking pixel
DaveMakesStuff

Snap-Together Gyroid Construction Kit

by

DaveMakesStuff

Follow
Follow
Remix Model
Like
DaveMakesStuff
DaveMakesStuff
Image 1 of 4
Snap-Together Gyroid Construction Kit 3d model
2D
3D
Makes
Snap-Together Gyroid Construction Kit 3d model
Snap-Together Gyroid Construction Kit 3d model
Snap-Together Gyroid Construction Kit 3d model
Snap-Together Gyroid Construction Kit 3d model
This model is restricted by licensing terms. 
16 Likes24 DownloadsMay 11, 2022
This model is restricted by licensing terms. 


This simple snap-together construction kit offers an interesting way of representing and visualizing gyroid construction. It is inspired by this blog: https://minimalsurfaces.blog/2018/12/23/make-your-own-gyroid/

The "Square" and "Star" tiles are designed to use a minimal amount of filament. All of the walls are 1.6 mm. Ideally, print with a 0.8 mm nozzle with single wall thickness. Print with no infill, no tops or bottoms, and turn off any feature that might fill the small gaps between walls. Print without brim as able.

Of the three tabs protruding from each edge of the shapes, one of the tabs has bulges on both sides, while the other two tabs have corresponding indents. This permits attachment in only one direction, but it sometimes takes some close inspection to be sure they are lined up correctly.

See here for another Gyroid Construction Set: https://thangs.com/mythangs/file/66307


16 Likes24 DownloadsMay 11, 2022




This model is restricted by licensing terms. 
16 Likes24 DownloadsMay 11, 2022
This model is restricted by licensing terms.