tracking pixel
DTaggart

CottonCannister.stl

by
DTaggart
Follow
Follow
Remix Model
DTaggart
DTaggart
|
Image 1 of 3
CottonCannister.stl 3d model
DTaggart
DTaggart
|
Image 1 of 3
CottonCannister.stl 3d model
2D
3D
Makes
CottonCannister.stl 3d model
CottonCannister.stl 3d model
CottonCannister.stl 3d model

A simple cannister with a baffle in the middle with a loose-fitting lid. Tall enough to accommodate Q-Tips cotton swabs. Printing: Layer Height .2mm for smoothest operation .3 works fine though. Material considerations: Parts of this model are only 2 walls thick. Warping might need to be considered when picking a material. If it will be stored someplace hot, or humid choose materials that will not be adversely affected.

For more models. Check out my website https://RebelTitanDesigns.com


0 Likes2 DownloadsMarch 19, 2024



0 Likes2 DownloadsMarch 19, 2024