My rebuilt version of a bottle lock for bottles with a cap

Hinged Bottle Lock.stl

Nametag with a hole for attaching I made for a friend's kid

Mingus_Nametag.stl

Small clip that holds my Mini's enclosure's door closed.  

Prints easily and requires 2 magnets, one glued to the clip and another attached to the case

Enclosure Mag Clip.stl

Holds a magnet so that I can put it on my pegboard (using mag pegs...see my upload).  Designed for my countersink bit with the label so that I know the size and details

Holds a 8x3mm magnet

Counter-sink holder magnetic.stl

Holds a magnet so that I can put it on my pegboard (using mag pegs...see my upload).  Designed for my countersink bit with the label so that I know the size and details

Counter-sink mag holder.stl

Cover for a wide slot so that filament can go through from above.  

This was sized to fit the hole I'd already cut so YMMV

Filament Passthrough Cover.stl

Hexagon shaped coaster.  I printed without some top layers so that the infill shows

Hex-coaster.stl

Pegboard-able circles for mounting magnets or magnetic items.  Like metal rulers or lite tools

Made to have 8x3mm magnets glued in

MagPeg_8x3mm.stl

Pegboard-able circles for mounting magnets or magnetic items.  Like metal rulers or lite tools

Pegboard-able circles for mounting magnets or magnetic items.  Like metal rulers or lite tools

Made to have 10x3mm magnets glued in

MagPeg_10x3mm.stl

I attached this to the side of my enclosure  to that I could use a spool mounted on the side and the filament wouldn't catch

Side Mount filament guide.stl

Clips on and routes the filament down.  I was using another version () but then I made this one so that it was taller and caused the filament to bend less.

Tall Filament holder clip for MK3s.stl

Basic toothpick holder. Remixed from https://www.prusaprinters.org/prints/57673-toothpick-holder

I removed the word at the bottom and tweaked things here and there

Toothpick holder.stl

Backing for Lebula 7in screen

Remix from https://www.prusaprinters.org/prints/10886-elecrow-7-inch-lcd-screen-case-no-gluing-required

Back frame with cutouts.stl

Splits the eSun clear plastic spools (that bolt together) in half to hold remnants or samples

eSun_spool divider.stl

Simple part to separate drawers to 2 then another part to make it 4

Dividers for 40-ct drawers

Divider for 40 drawer.stl

CardHolder (for floppier cards).stl

Simple bracket, remixed from ..., to attach two 2020 extrusions

2020 Extrusion corner bracket.stl

Pegboard mount to secure to the wall (with command strips) and keep is distanced from the wall

Pegboard Corner Cap.stl

Pegboard Center base.stl

Pegboard Corner Base.stl

Pegboard Center top.stl

Small bracket that works with command strips to mount poster board up

I have some dead space in the corner near my desk and I wanted to mount something across it rather then flat to the wall.


45 degree Bracket for mounting poster board 

Cover that clips on to the fan and blocks the (slight bit) of air coming from the hotend fan. It's probably not that significant but I saw this design to protect fingers when the hotend is heated and I modified it hopefully keep some of the fan breeze off the part and bed.
It's working fine with PLA but I'll probably reprint with PETG to be safe

Hotend shield.stl

Longer hook for more stuff.  I wouldn't put anything too heavy on it

Longer command Hook.stl

Simple handle.stl

Here's a basic square Polypanel subdivided. I use it for my pens and desk tools

PolyPanel - Subdivided.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

DC

Achievements

Seedling

Debutant

Voyager