The goal,
To make the Voron afterburner more stable and accessible to any printer user with the upgrade of only a single linear rail on the X-axis converting the printer to a fully working no original carriage required system.

Heavily remixed
Testers needed.
V0.1
Crafted to be compatible with Clockwork 1 and 2. While designed for a Creality printer it should work on any printer with an under-mounted belt vs the front-mounted belt of standard versions.
Updated the wiring management system adding the stock current afterburner cut in for wire management from the hot end, split the block in half to make it easier to print added two additional strengthening points and a key for alinement, the two additional screw-down points should be fixed in place with nut and bolts this will reinforce the plate and allow for easier maintenance.
Added the maxium amount of material on the underside of the rail to the max clearance allowed without moving the endstop location.
The touch mount has been reworked for supportless printing, the holes are sized for 2 heat-set inserts.

Not mentioned in the original an X-limit switch stand-off is required for the switch to trigger file included.
BOM
Heat Set inserts M3
M3x40 qt2 for main body holding screws
M3x14 qt2 for tool head clip mount
m3x16 qt2 for belt clips
m3x10 or m3x13 qt1 for bltouch locking screw
M3x6 qt8 for bltouch mount and for trolly mounting and x endstop
m3x45 for the x stop housing holder.
M3 Nuts for long body holding screws
Several T-nuts to run across the length of the rail and bolts to match

MGN12H Rail

*BETA*Creality Compatible Afterburner with undermounted belt and front MGN12H Linear Rail v1

Main body half 1.stl

clip_belt_2.stl

clip_belt.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3079383.

In an effort to make the Band easier to print I have gone ahead and subdivided up the parts into more manageable pieces that should print cleaner with less support.

Included are two new Cuffs a solid half that can be printed in hard plastic, or made with flexible fimanet for a wearable half, and a second version that is a shelled out version to be filled with some kind of padding but still give you a clean outer look. 

I liked the original idea but the part seemed a bit rough with the low poly edges and was missing a few details, The model tolerances should allow for easy press fits on a .4nozzle. pieces ready for assembly printed the innermost band is 40MM wide. Please use this to calculate the size you need the band to be.

A Print quantities list is as follows.

Cube 1
Inner Circle 1
Outer Band 2
Peg 2
Inner Cuff either Solid or hollow version print 2 

Printed pictures coming soon.

Rebuild - God Eater Arc Bracelet

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3063177.

Can be resized a bit if, I created this to be similar but not identical to the original voltron shield with some added details and a larger scale to more closely match the figures size.

Original Voltron Lions Shield

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1628041.

8/22/2018
Update - Added Sword and shield both objects would be best printed on DLP for most detail note that accessories will contain more detail then originals this is an artistic choice and are generally designed off of full scale props. The shield bubble can be printed but would be best done from a casting or simply blue tinted resin pour into the shield.

Update - I will be loading these all into fusion 360 to perform tolerance testing, as well as look into hardware replacing some of the plastic pegs due to strength issues, I will also refine some of the details to reflect the actual toys however each lion takes around 20-30 hours or work to replicate all the engravings and ensure functionality with parts. All future models will be made printable working replica of my personal originals.

1:1 scale replica lion parts for Matchbox Voltron cats, these parts will not work as replacement parts for existing models but I may do such if there is a demand. Pegs will need to be glued/set in place. Movement restriction is placed on the front legs as in the actual toys as well as re-pegged parts. The rounded top pegs are for the feet and others for the upper legs. Parts should print on most any printer with less clean up and separation required. 

More part remixes to come.

Blue lion Details - Blue lion parts are currently non functioning that is to say it does not mimic the toy having issues with the separation of the body but I hope to upload a fully working version with raising back panel and head panel soon and back key to allow for eventual black lion to fit into it.


Red Lion - In Progress; being constructed from scratch.
Green Lion 
Black Lion - In Progress: being constructed from scratch.
Yellow Lion



Vontrol III Cats 1984 Matchbox - With Accessories

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2601166.

Custom designed to replace a broken or misplaced Flaming Voltron 1981 diecast toy Sword. But Should work for any voltron lion set from the era.

Sword exact size is undetermined (if you have one tell me) judging from photos I believe it's roughly 7" long however I have uploaded 3 sizes 6, 6.5, and 7"

Best Printed on a Resin Printer.

If done on MDF print directly standing up with a raft at slow speed highest resolution printer is capable of some and with .2 or smaller nozzle. 

I will be posting a print done at 50 microns with a .4 nozzle and a resin print for comparison.

Flaming Sword Voltron Toy

Creality fits Ender 3 and Ender 3pro Cr10 base models Ender 5 (should fit)

Afterburner Creality Plate

For Ender 3 Ender 3 Pro CR10 base models and should fit ender 5 

Afterburner Creality Adaptor Bltouch

Afterburner Creality Adaptor Plate

Long time designer, 3d printer enthusiasts, Full time Cat dad.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like