Push fit holder for 5x 'regular' 56x19mm sewing spools

Multiboard Cotton/Thread Spool Holder

1x4 - 5 Reel Holder v5.stl

Remixed from https://than.gs/m/997169 by Keep Making

Reduced to 4mm offset to use with Command Picture (Velcro) Strips - these strips add 4mm which brings offset back to a neat 8mm (less offset = reduced leverage forces)

Requires use of 'low profile' snap removal tool - to be published soon

4 mm Offset, Trio Command Strip Mount - DS Part A for Multiboard

4 mm Offset, Trio Command Strip Mount - DS Part A.stl

Reduced offset to 4mm and modified to use with a single, Large Command Picture (Velcro) strip - these strips add 4mm, so you end up back to a neat 8mm (less offset results in less lateral loads on the wall mounts)

Print in orientation shown, 0.2mm, 3 walls and 15-25% infill - brim may be helpful (not required on my Bambu P1S). Combined parts weigh ~10.4g

Can be printed flat, while retaining comparable strength, using quality PLA Pro/Plus/etc, using the following - .2mm layers, 4 walls, 35% infill and 'alternate extra wall' if using Orca. Combined parts weight increases by a whopping  ~1.5g to ~12g.

Requires a 'low profile' snap removal tool - to be published soon..

Remixed from 8 mm, Cross Quad Offset Snap - DS Part A by Keep Making and inspired by https://than.gs/m/996652 by finntasticg

4 mm Offset, Command Strip Mount, Cross Quad Offset - DS Part A for Maultiboard

4mm offset command strip mount Part A cross snap - Part1.stl

4mm offset command strip mount Part A cross snap - Part2.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Craft3d

Achievements

Trailblazer

Seedling

Debutant

Multiboard Cotton/Thread Spool Holder

4 mm Offset, Trio Command Strip Mount - DS Part A for Multiboard

4 mm Offset, Command Strip Mount, Cross Quad Offset - DS Part A for Maultiboard