Inspired by the Blackwing style eraser holder. Slips onto a standard hexagonal pencil. Has a cavity on the inside that conforms to the shape of a sharpened pencil to protect the pencil tip during transport.

You will need to cut the eraser yourself to fit. I designed the holder based off Staedtler Large Erasers. You simply need to cut 4.5mm slices off the eraser, insert the slice into the clip, and press the clip and eraser into the holder. Cutting the eraser can be surprisingly tricky and you may need to adjust the size afterwards: Err on the side of too large as you can trim it down, but too small won't work at all. 

Functions as intended and is worlds better than the cheap erasers that are often included with pencils. 

For printing purposes you should be able to print the clip directly on the bed. However the holder I recommend printing vertically with a brim. I have had the best results printing in this manor. 

Picture of eraser used Below:

https://i5.walmartimages.com/asr/faecd04c-1a03-4adf-91a7-4f716f51c29b.dc27f0b9f6a7891e43479e3373cae39d.jpeg?odnHeight=450&odnWidth=450&odnBg=ffffff

Adjustable Eraser Holder

Slips onto the pencil, and holds the eraser + clip.

Has a cavity on the inside that conforms to a sharpened pencil. You can place the holder on the sharpened end and the cavity will protect the tip during transport. 

Adjustable _ Eraser Holder.STL

Decorative tree ornament. Hollow section so you can place something inside as it prints. 

Ornament_ Snowman.STL

Ornament_Bell.stl

Ornament_Star.stl

Simple sanding block. Uses printed threads so be sure your printer is able to handle that. 

Should scale without issue if you want a larger or smaller block. 

Sanding Block

Intended to be used with a stainless steel pint cup insert. Hole at bottom is so you can push the insert out, and to prevent the cup from being used without the insert. 

Link provided to the specific cup I used.

There is a full version of the cup, and a split version for ease of printing. 

(https://www.amazon.ca/gp/product/B07CTHKW7G/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)

Deep Rock Galactic Mug

Deep Space _ Dwarf _ Cup.STL

Intended to replace the air-duct for the Monoprice 113860 Maker Select 3D Printer v2.

Recommend printing on an SLA printer.

Will need a 40mm blower fan. Link provided to the specific fan I bought. 

(https://www.amazon.ca/WINSINN-40x20mm-Brushless-Cooling-Extruder/dp/B07L2XZKS7/ref=sr_1_3?crid=38ZRZ2NV8NRTT&dchild=1&keywords=40mm+blower+fan&qid=1635523458&s=industrial&sprefix=40mm+blower+fan%2Cindustrial%2C109&sr=1-3)
 

Air Duct Replacement for Monoprice v2 Printer

3D-Printer_Air-Duct_2.1.STL

4x3 Bottle trays can be printed up including handles. Can glue multiple trays together to get the desired size. Do not recommend going longer than 4 trays. 

Holds Army Painter dropper bottles.

Dropper Bottle Paint Tray 

4x3 Tray, holds 12 dropper bottles (Army Painter specifically) 

Paint-Tray_1.0.0.STL

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

ConteAmarula

Achievements

Seedling

Debutant