tracking pixel
Cinderwing3D

Tiny Pumpkin Spider

by
Cinderwing3D
Follow
Follow
Remix Model
Cinderwing3D
Cinderwing3D
|
Image 1 of 9
Tiny Pumpkin Spider 3d model
Cinderwing3D
Cinderwing3D
|
Image 1 of 9
Tiny Pumpkin Spider 3d model
2D
3D
Makes
Tiny Pumpkin Spider 3d model
Tiny Pumpkin Spider 3d model
Tiny Pumpkin Spider 3d model
Tiny Pumpkin Spider 3d model
Tiny Pumpkin Spider 3d model
Tiny Pumpkin Spider 3d model
Tiny Pumpkin Spider 3d model
Tiny Pumpkin Spider - “ ...A web would indicate an arachnoid presence.” - 3d model
Tiny Pumpkin Spider 3d model
This model is restricted by licensing terms. 

Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!

This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale. Link Below! The Digital files are never to be re-sold, shared, or given away!

Commercial License and monthly bonus models: Thangs Memberships Patreon MMF Tribes 3D PRINTING SETTINGS FDM Settings 3 walls 10-25% infill No supports Raft or brim if you have adhesion issues

Resin Settings No supports, flat on plate 50 um layer thickness Light off delay can be helpful to let resin drip from links.

Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.


37 Likes354 DownloadsAugust 14, 2024


37 Likes354 DownloadsAugust 14, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

MaterialPLA
Layer height0.2 mm
Infill density10 %
SupportsNone
BrimNo
MulticolorAutomatic material system (AMS)
Infill styleGyroid