Pumpkin Wyvern

Introducing the Pumpkin Wyvern! 

This is a completely NEW body style that has some really fun features! 

• First, the fan wings print entirely in place! - no pop ins. All the fan style wings in the past have been pop-in ball sockets.
• Second, these wings have been designed to fully extend and hold their fan out position!  -Third, there is a notch that the wing rod can sit up into and hold an upright appearance. 
• Fourth, being a wyvern, there are no front legs, but also newly designed back legs.
• Fifth, The ball-sockets on these wings have been specially re-made to not fall out! The slicer will flag the ball as floating but this is not an issue. There is a small pillar in the socket and below the ball that supports it. When done printing, it simply breaks free and allows for full rotation!

Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!

This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale. Link Below! The Digital files are never to be re-sold, shared, or given away!

Commercial License and monthly bonus models: Thangs Memberships Patreon MMF Tribes 3D PRINTING SETTINGS FDM Settings 3 walls 10-25% infill No supports Raft or brim if you have adhesion issues

Resin Settings No supports, flat on plate 50 um layer thickness Light off delay can be helpful to let resin drip from links.

Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.