**Introducing my Dragon-O-Lantern! **
I wanted to give you a bunch of options with this design so I have made several variations shown/listed out in the attached pictures. The "Impression" label variations are just a recessed carve and when paired with translucent filament can glow through the face. (please see release pictures for reference) The "Carved" designs are complete cuts through the pumpkin. The big pumpkins have been tested to print well between 60 and 200%, while the smaller/solid pumpkins have been pre-shrunk to be a good keychain size and were only tested at that size.Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!
This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale. Link Below! The Digital files are never to be re-sold, shared, or given away!
Commercial License and monthly bonus models: Thangs Memberships Patreon MMF Tribes 3D PRINTING SETTINGS FDM Settings 3 walls 10-25% infill No supports Raft or brim if you have adhesion issues
Resin Settings No supports, flat on plate 50 um layer thickness Light off delay can be helpful to let resin drip from links.
Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.