A 10 inch server rack, designed for home labs and small bench setups. The Ocktron frame balances rigidity and printability, offering modular assembly, clean cable routing, and reliable support for networking devices, small servers, and test gear.

It supports mounting plates for Raspberry Pi and other microcomputers, mini‑ITX motherboards, SSDs and HDDs, SFX and Flex ATX power supplies, 7‑inch displays, and additional modules planned.

No soldering, threaded inserts, or costly rack screws required. Ocktron uses off the shelf, economical hardware and a single screw size for the assembly.

Dimensions: 5U wide, 6U length, 8U height.

3D Print Profile:

• PETG: for structural strength.
• Layer height: 0.2 mm
• Print speed: use standard for optimum results, or 40–60 mm/s (slower for fine details).
• Wall loops: 4 layers for optimal outer strength.
• Top layers: 5.
• Bottom layers: 3.
• Infill: 20% for optimal quality/strength of the pieces.
• Material support: yes
• Brim: not required.

BOM:

• 50 x #6 3/4 inches self tapping screws (American standard), or M4x16mm self tapping screws (Metric standard) .