Simple but effective spoolholder, inspired by  [Thingiverse 4049278](https://www.thingiverse.com/thing:4049279)    
Recreated completely with Tinkercad, pins at 38degree angle.  Added sideward stability and the hooks have a little notch that locks the rails in place on the IKEA Skadis pegboard system. 
My wife has 9 in a row on the pegboard to store her 40+ Embroidery-machine floss/thread spools.  
I printed this on a modified Creality Ender 3 pro in white PETG, nozzle 0.4, layerheight 0.28.  I could fit 4 rails per batch on the hotbed.  Good luck!   
please leave a like and/or send me your questions

Skadis 5x1 floss or spoolholder

Simple but effective spoolholder, inspired by  ....    Recreated completely, added sideward stability and the hooks have a little notch that locks the rails in place on the IKEA Skadis pegboard system. 
My wife has 9 in a row on the pegboard to store her 40+ Embroidery-machine floss/thread spools. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4546603.

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/944Px5IZFmF

Have added an bracket/holder for a 5015 fan on the bottom of the enclosuer holder (My printer is on damper-feet, this thingi only fits if you lift the pritner at least 5-6 cm.  
Makes for fine airflow. Just attach to bottom of endclosure using liberal amount of superglue! :-)

Enjoyed tinkering this enclosure.  Now my Duet Maestro is well contained on my Ender 3 Pro.   Thanks to original posters for inspiration. 

Let me know if you have questions!  best! 

Ender3Pro Duet-Maestro mount v2

no longer in development. Printed 100% and nice fit. Removed screwholes from original, used doublesided tape to stick remote-holder to de Meetup-device.

Logitech Meetup Remote holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4654269.

Customised version of Cupholder. Completely redone in TinkerCad.  
Just dimensions and inspiration from original post.  (https://www.thingiverse.com/thing:3360250)

Current version has: 
- a slot for 1 pen, 
- 1 slot for an emergency whistle, 
- one slot for a small flashlight (from China: Red Color MECO Q5 500LM Multicolor Zoomable Mini LED Flashlight 14500/AA Flashlight on banggood https://banggood.app.link/DOHUt2Rlrbb),
- one slot for a small box of Jordan toothpicks, 
- one round hole for a stick of Burt'sBees Lipbalm and finally a slot for Creditcard sized cards.  
Mini slot on front is placeholder for empty hearingaid batteries (312).  Middle small hole is for discarding used toothpicks (temporarily).  Bottom of the cup has a dome to save a bit on printmaterial.

Printed both in PLA and PETG, currently blue PETG as that matches the color of the car.

PM me if you need a Tinkercad Share, so that you can customize layout yourself. Or if you have any other questions. 

(Will soon add some photos of final result and details on whistle and flashlight.)

Audi A3 cupholder-organiser

Audi A3 cupholder, 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4545834.

Just a simple boardmarker holder for the office.   These markers have a larger diameter (of around 20mm) than most other markers I found on Thingiverse.  
Just import into Cura and slice.     

Add two or four strong magnets (10x2mm) with superglue to stick penholder to the whiteboard.  :-)

(Please ignore Manifold errormessage in Cura.. it will print fine!) 


Whiteboard marker holder (Pilot V)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4547014.

Remix from thing: 897280
Just enlarged 1 diameter for the Triton Bucket (ID ~36mm) and extended the other cilinder with ~5mm. 


90degr hose-elbow (32mm>36mm) for Triton dustbucket

Ender 3 Pro Y-axis cover for manual belt tensioner. 
Remix from https://www.thingiverse.com/thing:4799007
(Decreased width of mounting towers bu 0.8mm and extended covercap 2mm for better fit on my machine. 

tensioner_cover_-_remix_v2.stl

Ender 3 Pro Y-axis cover for manual belt tensioner. Remix from https://www.thingiverse.com/thing:4799007

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

CadZ

Achievements

Seedling

Explorer