We have three version of the dragonfly with different wing options. The first is a solid wing which has no design in the wing. The second is a open wing that has a pattern cut through the wing. The last version designated as "half wing" has a pattern that is cut partially through the wing.

All files designated with the "MH" have a hole for a 6x2 or 6x3 magnet that will need to be added during the printing process. If you stop at level 20 (printing at a .2 layer height), you can add the magnet but you may want to add a small amount of glue.

Each version has a stl and painted .3mf version. We recommend using 15% gyroid infill. No supports and no brims should be needed unless you have problems with your prints adhering to the plate.