Here is the model for my Vine Christmas Tree,

I designed this with a removable base so that it can be filled with lights, Potpourri, Candy or other suitably festive fillings.

I printed mine in the Awesome Gold Happens and Vertigo Starlight by Filamentum

This print really is a challenge on your retraction settings but is satesfying when completed. Though NO supports are required on this model so enjoy watching the vines grow off the print bed.

Enjoy and Merry Christmas

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Vine Christmas Tree

vine_christmas_tree.stl

Here is my Model for the Maple Twist,

This was requested by my friend @_Tinkerz on Twitter as he had some colours that were screaming to him to be printed as a leaf.

The model is designed to be printed separately allowing for up to 3 different colours to be used. The Photos (Supplied by @_Tinkerz) Thank you.

After Feedback I was told that the fit was a little tight, so I have increased the tolerance to allow it to slide together, i have however left the tighter version online for if you want to scale it up.

I hope you enjoy.

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Maple Twist

maple_twist_keyed_body1.stl

I have noticed a trend of “Remixes” where the only change is to lower the face count of another designer's model.

Well here is the ultimate expression of this thought.

you want a Lowest Poly Christmas Tree….. Print it in Green

a Lowest Poly Pikachu….. Print it in Yellow 

a Lowest Poly Thanos….. Well you get the idea

just having a bit of a giggle, I Hope you enjoy

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Lowest Poly Anything

Lowest Poly Anything.stl

Here is the File for my Vase Mode print

"MESMER"

I suggest printing it is something Shiny or Glittery for best effect.

Green photo by me.
Vertigo Starlight photos by Chris Russell - @Crussty on the Twitters

I hope you Enjoy.

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

MESMER

mesmer.stl

Here is the file for 

Snow Panda the Polar Bear

@MenacesMum wanted a Polar Bear Model to make in Resin, but for some reason every time I talked about him I called him a Panda 🤷😁

so Snow Panda became his name. 🎄

I hope you enjoy and Merry Christmas

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Snow Panda - The Polar Bear

Snow Panda - The Polar Bear.stl

Here is the model for Buzz Bear.

Buzz is a good Friend of Barry, and loves adventure and exploration. 

And like his friend he seems to just want to be your friend too, do you have space for Buzz? maybe he can keep Barry Company.

I hope you enjoy

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Buzz Bear

Buzz Bear.stl

Here is the model for Penny Bear.

Penny is a good but Hungry Friend of Barry, and is REALY into making things (and People) Float. And like his friend he seems to just want to be your friend too, do you have space for Penny? maybe he can keep Barry Company.

I hope you enjoy,

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Penny Bear

Penny Bear.stl

Here is the file for a nice quick Snowflake Print.

A fun addition to your tree, window or garland decorations.

I hope you enjoy.

and Merry Christmas

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

snowflake

snowflake.3mf

Discover our superb 4-colour Candy Cane Christmas tree 3D model at thangs.com Perfect for those who want to add a cozy and personalized touch to their Home & Garden this holiday season, this downloadable file allows you to create your unique festive décor. Ideal for printing with a range of colours, we used Fillamentum Pearl Violet, Gold Happens, Everybody's Magenta and Polyalchemy Silver - but feel free to experiment with colors that match your Christmas theme. Whether you're a 3D printing enthusiast or a beginner, the jolly spirit of Christmas will be easily captured with this 3D candy cane tree model. Make sure to track your progress after slicing by renaming the files. Enjoy your 3D print journey with us on thangs.com and have a Merry Christmas!

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

candy_cane_4_colour_tree_1.stl

Here is the file for the DogSausage.

a friend of mine has a sausage dog and happened to mention that people now always give her SausageDog themed gifts, I promised that I would never do such a thing……..so the DogSausage was born. 😁👍

I printed mine by standing it on the back legs (roughly at 45 degrees) then used the new Organic supports which worked a treat.

I hope you enjoy

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping.

https://www.buymeacoffee.com/bugman140

DogSausage

Here is a Quick #PracticalPrint for watching videos on your tablet.

a Tablet Stand for your desktop.

I printed mine with zero support and 10% infill, but feel you could have gotten away with less.

Edit:- use the “Powered” Version if you want the option of plugging in your tablet in portrait mode

I hope you enjoy

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Tablet Stand

Tablet Stand.stl

A quick print to allow you to turn 2 x Soda (Pop) bottle caps into a small pill box for if you want or need to take some back up medication with you.

also allows for some fun home recycling and customization by selecting the Bottle Cap of your choice

I hope this is useful, and that you enjoy.

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Soda Pill Box

Here are the files for My Wand.

I wanted a wand of my Own, not a copy of any specific wand, but I will admit I was inspired by the wand that Dumbledore owned before the Elder Wand.

I printed the “Blade” of my wand and the Handle in resin, and printed the Screw, Pummel and Hilt in a Silk Gold for some contrast.

you can then insert the screw into the pummel, then screw the pummel onto the handle, the Hilt is then threaded over the top of the handle and the “Blade” then twisted on top.

I then Printed the stand on my Mk3 with Zero Support for the wand to sit on, you will find that there is a specific orientation where the wand is cradled by all the vines.

I hope you enjoy.

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

My Wand

Wand.stl

Here is the file for my STARBOWL.

a fun print for your holiday decorations.

it print with zero supports, but you are going to want to use some infill.

I hope you enjoy and Merry Christmas

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

STARBOWL

Here is a christmas star I designed to be hung near some lights.

if you can print in resin then great, if FDM is your thing I suggest reaching for you shiny filament. 😁

I was feeling Soppy when I named this one so its called

"Star for Lil Nic"

for my lovely wife 😘

if you cant be extra soppy around Christmas when can you?

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Star for Lil Nic

star-for-lil-nic.stl

These are the files for my Candy Cane Christmas Tree,

Version 1 - this one has a Larger Gap between the 2 sections. meaning that it can be printed with Larger Layer Hights, and when printed at 0.2mm Layer Heights can be dropped together

Version 2 - this one is if you are looking for a Tighter Fit, I have successfully Printed this at 70% Scale with 0.2mm Layer heights and the 2 parts can still be nicely pushed together.

Both Versions can be printed with Zero Infill and with No Supports

Enjoy Playing with these Files

Merry Christmas

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Candy Cane Christmas Tree

candy_cane_christmas_tree_-_red_v1.stl

Here is the File for my Hufflepuff inspired wand.

The Badger grip makes it perfect to show your House Pride.

I hope you enjoy

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Hufflepuff Wand

Here is the File for my Slytherin inspired wand.

The Snake grip makes it perfect to show your House Pride.

I hope you enjoy

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Slytherin Wand

Here is the File for my Ravenclaw inspired wand.

The Raven grip makes it perfect to show your House Pride.

I hope you enjoy

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping.

https://www.buymeacoffee.com/bugman140

Ravenclaw Wand

Here is the File for my Gryffindor inspired wand.

The Lion grip makes it perfect to show your House Pride.

I hope you enjoy

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping.

https://www.buymeacoffee.com/bugman140

Gryffindor wand

A Pumpkin Vase for Halloween that can be printed in Vase Mode.

I hope you enjoy.

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Pumpkin Vase

Here are the files for my Triple Coven Light
I printed the Main Body (Coven - No Heads) on its head so no support would be required.
I then printed 3 x Broom heads the right way up with supports,
these can then be simply pushed onto the Broom handles to act as feet.
you can then either just add a LED tealight or print the optional Flame with no bottom layers or infill to drop ontop of he tea light.
I Hope you enjoy and HAPPY HALLOWEEN

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Triple Coven - Light

coven_-_no_heads.stl

Here is the Skull that I made in Sculptris for Halloween.
I printed mine in Fillamentum Light Ivory, but i'm looking forward to trying it in some more unconventional colour choices,
The bottom of the model has a shaped underside to allow it to be used in more situations, Though I was planning to sit mine on a table so I sank the model into the print bed to make it more stable (it also meant less supports were required).

I hope you enjoy and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍
https://www.buymeacoffee.com/bugman140

Skull_scar

Here are the files for my Haunted Candle a fun print for your Halloween Decorations

There is a version that includes a wick (Candle Stick) 

and one that includes a pathway for a LED and wires (Candle Powered)

The Candle Stick Holder has a void in the base to allow for electronics such as a modified Tealight to be added to power the LED in the candle, you can also use the rubber flame from the tealight in the top of the candle.

Though my good friend Grafit wanted to use LED's that he had to hand, so modelled an AWESOME flame to use with a standard size LED. he has kindly allowed me to upload the flame along with the haunted candle.

I hope you enjoy.

and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

The Haunted Candle

candle-stick.stl

Here is the model for Pumpkin Bear.

Pumpkin is a good Friend of Barry who is looking forward to go Trick or Treating with Barry.

And Barry he seems to just want to be your friend too, do you have space for Pumpkin? maybe he can keep Barry Company.

I printed mine with just a little organic support under his nose and muzzle, and it came out great.

I hope you enjoy, and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping.

https://www.buymeacoffee.com/bugman140

Pumpkin Bear

here are the files for my FRANKY

The head of one of the most famous “Monsters” Ever, Mounted and Ready to be re-energized when required.

The head needs a little support under the bolts and ears, the rest prints with zero support, i used filament swaps to add more colours.

I have also included a Combined Version for if anyone want to print as one (with supports) or possibly in resin

I hope you enjoy.

and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Franky

Franky Combined.stl

The Flaming Cauldron

A Cauldron with a base of perpetual Fire where the flames have been petrified and have become part of the Cauldron its self.

It is said that this rare artifact was successfully enchanted by its creator to survive being placed on Magical Perpetual Fire, the unexpected side effect was that the flame became fused with the enchantment and the metal forever

this file can be printed with zero support, I printed mine with 5% infill and it came out great

I hope you enjoy.

and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Flaming Cauldron

Here is the model for Barry Bear.

Barry is a little softy who just wants to be your friend, do you have space for Barry.

he is a cute little bear that prints with very little support.

I printed mine using just a little organic support under his chin and he came out great.

I hope you enjoy

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping.

https://www.buymeacoffee.com/bugman140

Barry Bear

there are the files for my Painting Handles for hands Large and Small, 

I printed mine with some infill to give it a little strength, pop some Blu Tack (Adhesive Putty) on the top face to hold your model and then get to painting.

I hope you enjoy

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping.

https://www.buymeacoffee.com/bugman140

Painting Handles

Small Painting Handle.stl

Have you ever wanted to play like an Addams?

Well Here are the files for my Madame Guillotine - Desktop Edition

this all prints with Zero Supports in 3 parts, then simply slide the blade into the runners then insert the runners into the Bench

no glue required so it can be disassembled for easy and safe storage.

I hope you enjoy.

Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140


Madame Guillotine - Desktop Edition

bench.stl

Here is the model for Boo Bear.

Boo is a good but spooky Friend of Barry, and like his friend he seems to just want to be your friend (but i would keep an eye on him), do you have space for Boo? maybe he can keep Barry Company.

I hope you enjoy, and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Boo Bear.stl

Here are the files for The Maiden of Death

a spooky graveyard statue keeping a watchful eye over wandering spirits.

I printed mine at 0.2mm layer heights and with 5% infill, you will need just a little support under the cheekbones

I hope you enjoy.

and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

Buy me a coffee
 
https://www.buymeacoffee.com/bugman140

The Maiden of Death

the maiden of death.stl

Here are the files for The Final Embrace

A bust of Death himself, the Reaper prints separately from the base to allow different materials to be selected. 

I printed my Reaper with a little support painted under the jaw bone and 5% infill 

Just be careful to keep the support on the outer edge of the jaw and separated at the chin, or it can become a bit tricky to get them out, though Organic supports should work a treat here

The Base prints with Zero Support, I still used 5% infill to give it a little strength.

I hope you enjoy.

and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

The Final Embrace

reeper.stl

Here are the files for the hanging version of my Gothic Lantern

This is designed to have paper slips added to act as the screens,
though I used some 3D effect plastic craft sheets which gave a cool effect.

The Handle should be inserted from the top then retained by twisting on the "Bolt" inside the lantern. Once the screens are slid in the grooves from the bottom, the base can then be held in using the print in place clips.

I printed this with a 0.4mm nozzle and with zero supports with no problems

I hope you enjoy.

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140


Gothic Lantern - Hanging Version

gothic-lantern-hanging-version.stl

Here is the file for “Calice della Morte” (the Chalice of Death)

The Calice della morte is an ancient artifact that was created by a powerful sorcerer named Lucius Malvolio during the Dark Ages. 

He became obsessed with finding the secret of immortality and performed many experiments on human subjects, using dark magic and alchemy. He discovered that by mixing the blood of a pure-hearted person with a rare potion, he could create a liquid that would grant him eternal life. 

He poured this liquid into a chalice that he had carved from the wood of a magical tree the location of which is known only to Lucius himself he then enchanted the cup with various spells. 

He named it the Calice della morte, as he believed that it would allow him to conquer death itself.

I printed mine in Fillamentum Timberfill Light Wood on my Prusa Mk3 with a 0.8mm nozzle with 0.5mm infill and zero support, 

I then gave it a sanding up with 180 grit before weathering with some coffee alcohol ink diluted with isopropyl, i then gave it a second sanding with 240 grit to re lighten the highpoints.

though if you wanted to print in plastic i would try dry brushing the model for a similar effect

I hope you enjoy, and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping.

https://www.buymeacoffee.com/bugman140

Calice Della Morte

Here is the model for Jason Bear.

Jason is a good but scary Friend of Barry, and like his friend he seems to just want to be your friend (but i would keep an eye on him), do you have space for Jason? maybe he can keep Barry Company.

I printed mine using just a organic support under his chin and his machete arm and he came out great.

I hope you enjoy, and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

Buy me a coffee

https://www.buymeacoffee.com/bugman140

Jason Bear

Here is a nice quick print a small fun stand to display a Benchy.

I hope you enjoy.

Thanks

Bugman

Dry Dock

Here is a nice quick print based on a request from @aRoguegumsheild for his #BigBenchyBlowout

a small fun stand to display a Benchy.

I hope you enjoy.

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

Buy me a coffee
 

Buy me a coffee

DryDock

Here are the files for Gourdo the Pumpkin.

a cute little pumpkin for your Halloween decorations. you will need a little support for this pumpkin, but I painted supports on the teeth and eyes to avoid supporting the whole pumpkin.

The stork is a separate file to allow for a second colour to be selected.

I hope you enjoy.

and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/Bugman140
 

Gourdo the Pumpkin

gourdo.stl

Here is the file for the Copper Cauldron

its a simple Cauldron for Halloween that prints with Zero supports for your decorations.

I hope you enjoy.

and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

Buy me a coffee

https://www.buymeacoffee.com/bugman140

 

Copper Cauldron

Copper cauldron

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Bugman_140

Achievements

Fan Favorite

Sapling

Explorer

Novice Maker

Rising Star