Bonus Set - Happy Halloween pumpkins
For these Models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 70x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Orange At layer #10 (0.88mm) swap to Yellow At layer #17 (1.44mm) swap to Jade White for the rest
2 Likes11 DownloadsOctober 17, 2024