Bonuses this week start with 3 from the Marvel universe. Several realistic chibi style little ones - Third is Captain Marvel.
For this Model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 210x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Blue At layer #9 (0.8mm) swap to Pink
Border Only Colors from here until the end. At layer #16 (1.36mm) swap to Jade White for the rest.