2nd set this evening.

For this set:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.67x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Indigo Purple (10701) Transmission Distance: 2 PLA Bambu Labs Basic Cyan (10603) Transmission Distance: 8 PLA Bambu Labs Basic Pumpkin Orange (10301) Transmission Distance: 5.5 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 This print uses 5 unique filaments

Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Indigo Purple (10701) At layer #11 (0.96mm) swap to Cyan (10603) At layer #17 (1.44mm) swap to Pumpkin Orange (10301) At layer #21 (1.76mm) swap to Beige (10201) for the rest.