2nd bonus for this week - some funky seahorses.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 68.56x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Matte Grass Green Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 5 unique filaments
Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #11 (0.96mm) swap to Pink At layer #17 (1.44mm) swap to Grass Green At layer #20 (1.68mm) swap to Ivory White for the rest.