Michael M
Michael M

Fanart - Evil Queen Maleficent hatching her evil plan

by
BooneCo3d
BooneCo3d
BooneCo3d
BooneCo3d
|
Image 1 of 3
Fanart - Evil Queen Maleficent hatching her evil plan 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 3
Fanart - Evil Queen Maleficent hatching her evil plan 3d model
2D
3D
Makes
Fanart - Evil Queen Maleficent hatching her evil plan 3d model
Fanart - Evil Queen Maleficent hatching her evil plan 3d model
Fanart - Evil Queen Maleficent hatching her evil plan 3d model

Fanart - Evil Queen Maleficent hatching her evil plan

Bonus Friday - Sharing some art I have been messing with over the last few days. First is this concept sketch of Maleficent, the Evil Queen in Sleeping Beauty. Similar to that of Disney's renditions.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 210x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Blue At layer #13 (1.12mm) swap to Lilac Purple At layer #20 (1.68mm) swap to Jade White for the rest.