Bonus for week 4 - Went down a rabbit hole of designs and these wolves were created. The look of almost ghosts with the blues adding to the feel. They make a great picture when mounted together.
For these Models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 65.03x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #11 (0.96mm) swap to Marine Blue At layer #17 (1.44mm) swap to Jade White for the rest.