3 sets of bookmarks this evening and an artistic piece.

First:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #6f5034 PLA Bambu Labs Basic Cocoa Brown (10802) Transmission Distance: 1.4 #c12e1f PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 #ffffff PLA Bambu Labs Matte Ivory White (11100) Transmission Distance: 3.5 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #10 (0.88mm) swap to Cocoa Brown (10802) At layer #13 (1.12mm) swap to Red (10200) At layer #22 (1.84mm) swap to Ivory White (11100) for the rest.