some bookmarks for the chinese new year.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size

You may print at higher layer heights below the Base Thickness of 0.4mm The Max allowed Thickness is 2.16mm and the Actual Thickness is 1.44mm

#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #c12e1f PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 #f4ee2a PLA Bambu Labs Basic Yellow (10400) Transmission Distance: 6 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #10 (0.88mm) swap to Red (10200) At layer #15 (1.28mm) swap to Yellow (10400) At layer #19 (1.6mm) swap to Jade White (10100) for the rest.