I designed this to fit over your pc ram and help cool the ram off.it is a tight fit over the ram slots but I have include the step file if you would like to change the fitment. To snap the front cover on you just slide one side in and pull out the other side a bit and it pops in place.



You will need supports and i print it in ABS at .2 layer with 20% infill
Designs covered by a Creative Commons Share-Alike License.

Dual 40mm Fan PC Ram Cooler

Ram Bracket.stl

This knife holder was design to look like voodoo doll and be great addition for someone who likes these stuff or prop for spooky season.

All of my Designs are covered by a Creative Commons Non-Commercial License.  Sale of prints using my designs are the sole right of myself, and those I license to do so. By downloading this design you are agreeing to these terms. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.
[NonCommercial](https://creativecommons.org/licenses/by-nc-sa/4.0/)~ — You may not use the material for commercial purposes.
PRINT SETTING

Material- any

.2 layer

25% infill( helps keep it stable more will be better)

lay flat on build plate 

NO SUPPORT 

VOODOO_KNIFE_DOOL

I designed this to replace the paper walls that come with the Fortnite monopoly

All of my Designs are covered by a Creative Commons Non-Commercial License.  Sale of prints using my designs are the sole right of myself, and those I license to do so. By downloading this design you are agreeing to these terms. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.



STEEL WALL FORTNITE MONOPOLY

BRICK WALL FORTNITE MONOPOLY

I designed this to replace the box that comes with Fortnite monopoly game to hold game pieces.

All of my Designs are covered by a Creative Commons Non-Commercial License.  Sale of prints using my designs are the sole right of myself, and those I license to do so. By downloading this design you are agreeing to these terms. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.



AMMO BOX FORTNITE MONOPOLY

AMMO BOX TOP FORtNITE MONOPOLY.stl

I designed this to replace the box that comes with Fortnite monopoly game to hold game pieces. 

All of my Designs are covered by a Creative Commons Non-Commercial License.  Sale of prints using my designs are the sole right of myself, and those I license to do so. By downloading this design you are agreeing to these terms. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

WOOD CHEST

WOOD CHEST TOP.stl

I design this to help make better videos for TikTok. It uses one 608 bearing (skateboard wheel bearing). With this it makes easy to turn your product around to show off all side with one finger.  


All of my Designs are covered by a Creative Commons Non-Commercial License.  Sale of prints using my designs are the sole right of myself, and those I license to do so. By downloading this design you are agreeing to these terms. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

Manual Display Turn Table(161mm) 6.3"

Base of Turn Table.stl

Details
I design this to clamp to a desk to clear up space. the clamps are made for 18mm mounting area. You can change the z scale to make it taller or smaller as needed. It has M3 holes, so you are able to use them to assembly and hold to the desk. I printed it in ABS at .2 layer, there is no need for supports.  You will need to print two clamps for it.

If you like to support me please go follow me on TikTok blake3dprinting [https://www.tiktok.com/@blake3dprinting?is_from_webapp=1&sender_device=pc](url)

All of my Designs are covered by a Creative Commons Non-Commercial License.  Sale of prints using my designs are the sole right of myself, and those I license to do so. By downloading this design you are agreeing to these terms. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

CLAMP HOMEPOD MINI.stl

**Details**
I design this to clamp to a desk to clear up space. the clamps are made for 18mm mounting area. You can change the z scale to make it taller or smaller as needed. It has M3 holes, so you are able to use them to assembly and hold to the desk. I printed it in ABS at .2 layer, there is no need for supports.  You will need to print two clamps for it.

If you like to support me please go follow me on TikTok blake3dprinting[](https://www.tiktok.com/@blake3dprinting?is_from_webapp=1&sender_device=pc) 


All of my Designs are covered by a Creative Commons Non-Commercial License.  Sale of prints using my designs are the sole right of myself, and those I license to do so. By downloading this design you are agreeing to these terms. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.


Apple HomePod Mini Desk Mount

This is one of my enters to the workSpace challenge. the design started for [@MandicReally](https://thangs.com/designer/MandicReally) Blank can cup.  The setting I used was .2 layer and no supports needed. @thangs3d
**_PRINT SETTING
This model requires supports for the overhang. i put support blockers on the threads because they are not need. I printed it at a . 2 layer height/

This is remix of mandicreally  and cannot be sold.
All of my Designs are covered by a Creative Commons Non-Commercial License.  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. By downloading this design, you are agreeing to these terms. Please understand every design is hours of work and multiple prototype prints to ensure quality. 

NOZZLE 12oz Can Cup - WORKSPACE Challenge

This is one of my enters to the workSpace challenge. the design started for [@MandicReally](https://thangs.com/designer/MandicReally) Blank can cup.  The setting I used was .2 layer and no supports needed. @thangs3d

This is remix of mandicreally  and cannot be sold.
All of my Designs are covered by a Creative Commons Non-Commercial License.  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. By downloading this design, you are agreeing to these terms. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

MX Tire 12oz Can Cup Workspace Challenge

This is one of my enters to the workSpace challenge. the design started for @MandicReally Blank can cup.  The setting I used was .2 layer and no supports needed. @thangs3d

This is remix of mandicreally  and cannot be sold.
All of my Designs are covered by a Creative Commons Non-Commercial License.  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. By downloading this design, you are agreeing to these terms. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

MX Tire_12oz_Can_Cup.stl

This was design in fusion 360 for a headset stand.There is two bases for it one that gives it a tower look and one that is rock like. the tower like one snap into place by the bottom of the sword. It is a tight fit. i have also put a pre supported resin file for the sword. 


All of my Designs are covered by a Creative Commons Non-Commercial LIcense.  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

PLEASE Credit any and all Remixes of my designs. Blake3d




Energy sword Headset stand

energy_sword.stl

energy_sword_Base_rock_like.stl

energy_sword_Base_Tower.stl

energy sword Base Tower.stl

energy sword Base rock like.stl

energy sword.stl

This is design to spin around the sprocket at the base. I printed it at .2 layer with 10% infill. No supports needed

All of my Designs are covered by a Creative Commons Non-Commercial LIcense.  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

PLEASE Credit any and all Remixes of my designs. Blake3d

HEADSET STAND SPROCKET.stl

This is design to spin around the sprocket at the base. I printed it at .2 layer with 10% infill.

All of my Designs are covered by a Creative Commons Non-Commercial LIcense.  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

PLEASE Credit any and all Remixes of my designs. Blake3d

this is 12oz  cup. this cup can not be sold

All of my Designs are covered by a Creative Commons Non-Commercial LIcense.  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

PLEASE Credit any and all Remixes of my designs. Blake3d

Emoji Valentines 12oz CanCup.stl

Emjoi Valentines 12oz CanCup.stl

this is 12oz pokeball cup. this cup can not be sold 




All of my Designs are covered by a Creative Commons Non-Commercial LIcense.  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

PLEASE Credit any and all Remixes of my designs. Blake3d

Pokeball twist can cup

Pokeball can cup

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Blake3DPrinting

Achievements

Seedling

Debutant

Trailblazer