EN: it's a simple cover for a furniture hole handle as shown in the picture, it is intended for a 35mm hole

PT-BR: é uma cobertura simples para um pegador de móvel de furo como mostrado na foto, é para um furo de 35mm

Furniture hole handle cover

furniture handle hole cover.stl

EN: This is an ongoing project I'm working on, a Humanoid Robot, for my youtube channel, all the videos talking about it are in portuguese for now as I've not had the time to translate them to english yet, so if you want to follow it, that might be an issue.
The basic premise behind this structure is being multifunctional, even if you don't want to build it exaclty like I did, you can still use it for your own purposes, maybe even for a non humanoid robot. For the full project with electronics and code check out the github repository:
https://github.com/BenjamimKrug/robo_humanoide

PT-BR: Esse é projeto em progresso ainda no qual eu estou trabalhando no meu canal do youtube, um Robô humanóide, todos os vídeos estão apenas em português por enquanto. A premissa básica da estrutura em si é ser multifuncional, mesmo que você não queira montar um robô exatamente igual o meu, você ainda assim pode usar as peças para o seu propósito, talvez até mesmo para montar um robô não humanóide. Para o projeto completo com a parte eletrônica e códigos veja o repositório no github:
https://github.com/BenjamimKrug/robo_humanoide

3D printing settings
EN: The print in the pictures was made with PLA and 0.2 mm layer height, but in theory you can print with any material as long as it is rigid

PT-BR: A impressão nas fotos foi feita com PLA e 0.2 mm de altura da camada, mas em teoria qualquer configuração e filamento serve contanto que fiquem rígidas as peças

Humanoid robot structure

estrutura-base servo MG995.stl

This is a single release of ONLY the head from my 3d printed Star saber figure. For the whole figure, check out the full release: https://cults3d.com/en/3d-model/art/3d-printed-star-saber-from-transformers-idw

Esse é um lançamento individual de SOMENTE a cabeça do meu Star saber impresso em 3d. Para a figura completa, confira este link: https://cults3d.com/en/3d-model/art/3d-printed-star-saber-from-transformers-idw

3D printing settings
He was printed in FDM, but I believe printing it int Resin will still work well. The general print settings are included in the assembly instructions.
Showcase of the figure in English:
https://www.youtube.com/watch?v=xHnn5RRmTIw

Ele foi impresso em FDM, mas acredito que imprimir em Resina ainda ficaria bom. As configurações de impressão estão nas intruções de montagem.
Demonstração do boneco em português:
https://www.youtube.com/watch?v=Z_dBKdca1uc

3d printed Star Saber Head from Transformers IDW

26-helmet(RED).3mf

EN: Inspired by the Skybound Transformers comics, I made an arm cannon for the SS102 Optimus prime figure. The general shape is based off of ss109 Megatron's cannon since it would be that cannon that the ROTB Optimus would get if he did the same as the comic.

It is comprised of 4 pieces to make sure you get the best results for each one, instead of printing it whole and dealing with a ton of supports.

PT-BR: Inspirado pelos HQs dos Transformers da Skybound, eu fiz um canhão de braço do Optimus Prime SS102. A forma geral é baseada no canhão do Megatron SS109, já que é esse canhão que o Optimus do Ascensão das feras teria se ele fizesse o mesmo que nos HQs.

Ele é montado com 4 peças para garantir que você consiga imprimir com boa qualidade cada peça, ao invés de ter que lidar com um monte de suportes.

3D printing settings
EN: Printed it on my Ender 3 with variable layer height with 0.2 mm for most of it and 0.08 mm on the vertical bevels. The filament was black ABS. One thing you'll notice is it's very shiny, that's because I sanded it and polished all the pieces with a nail polisher.

PT-BR: Imprimi na minha Ender 3 com altura de camada variável com 0.2 para quase tudo e 0.08 mm para as partes mais curvadas. O filamento usado foi ABS preto. Algo que você provavelmente percebeu foi que ele é bem brilhoso e liso, isso é porque eu lixei e poli as peças usando uma lixa polidora de unhas

Megatron arm cannon for SS102 Optimus Prime

optimus cannon barrel.stl

Kind of a very specific problem, but my scout class Dune Runner figure broke one of the shoulders, so I desgined a replacement for it, and I think it might be useful for others.

The included file is for the left shoulder, so you just need to mirror it on your slicer to get thee right shoulder.

To attach it to figure I replaced the pin with a 2mm screw, which I also added a picture showing it.

And it does replace the original piece without affecting the transformation and vehicle mode, as you can see in one of the pictures

3D printing settings
Printed with a stock Ender 3
Filament: ABS
Layer height: 0.08mm
Temperature: 245ºC

I also added a picture of the orientation I printed it in to have the maximum strength.

Ben's Lab

Achievements

Seedling

Pinned models

Humanoid robot structure

Furniture hole handle cover

Humanoid robot structure

3d printed Star Saber Head from Transformers IDW

Megatron arm cannon for SS102 Optimus Prime

Shoulder replacement for Transformers ROFT Dune Runner scout class