Showcase your love for unique, 3D printed home decor with this stunning Tri-linked Knot.

Designed to fit seamlessly into your home interior style, this model brings a modern edge to home decor.

Use it as a center piece or as a fidget toy. My kids love it! Either way, it's a fun print!

I've provided files for those who wish to use magnets and for those who do not. The version with magnets serve to support the knot better while in the stand.

I've also provided a large version that I printed on my A1. Build volume is roughly 231 x 240 x 190. Special Note: You could try to scale this down with its accompanying stand, but it may not fit in the stand afterward depending on how you scaled it. Generally, you'd want to scale the knot further down than the stand (e.g. if you scaled the large knot down by 80%, you'd want to scale down the stand above 80% to ensure it still fits)

Optional Hardware (for if you print the magnet version, of course):

• 6mm x 3mm magnets (6)

Print Instructions: This knot prints at an extreme angle with limited contact with the print bed, so with that in mind, the following print instructions are provided.

Supports: Recommended. The supports will serve to keep the model from falling over rather than support overhangs.

• Tree
• Threshold Angle: 45 degrees
• Top Z Distance: 0.12mm Brim: Recommended