Faceted Dish

Easy print dish - no need for supports

Can be printed in vase mode but for best results I recommend printing with the following settings

0 top layers
2+ bottom layers
0% infill
2+ perimeters

intricate facets twisted vase

Easy to print vase - no need for supports etc.

Recommended settings:

- 3 perimeters
- 3 bottom layers
- 0 top layers
- 0% infill

Tall bowl/pot - intricate facets

Easy to print bowl - no need for supports etc.

Recommended settings:
- 2 perimeters
- 2 bottom layers
- 0 top layers 
- 0% infill

Twisted Facets Vase

Prints fine in vase mode if you want a quick print but for best results recommend printing with the following settings:
- 2-3 perimeters 
- 2-3 bottom layers 
- 0% infill
- 0 top layers

multifaceted bowl 3 (large facets)

Simple faceted bowl
To be printed in vase/spiralise mode

multifaceted bowl 2 (large facets)

multifaceted bowl 1 (large facets)

Stone Pot

stone effect pot/vase to be printed in vase/spiralise mode

Trinket Bowl Lid

Trinket Bowl

Easy to print faceted bowl to be printed in vase/spiralise mode

Faceted Bowl

Citrus Coaster

Easy to print coaster, just switch out the filament at 3.2mm and 4.2mm for the multicolour effect using a standard printer

Faceted Tumbler

Designed to be printed in vase/spiralise mode, this is a straightforward print with no need for supports.

Hidden Pattern Tealight Holder

Simple tealight holder - pop an electric tealight inside to see the pattern glow through

No need for supports 
Recommend printing with 100% infill if you don't want the infill pattern to show through

Wavy Bowl 2 - vase mode

wavy bowl to be printed in vase/spiralize mode .2 or .3 layer height should be fine

Model in photos was sliced in PrusaSlicer (I have also tested SuperSlicer but not Cura) and is printed in ProtoPasta Midnight HTPLA 

Wavy Vase (Tealight Holder)

This is designed to be printed in vase/spiralise mode

There's also a version of this with a light fitting to be used as a lampshade - you can find that here: https://social.thangs.com/m/111471

This was designed using full control gcode - if you'd like to know more, I've written an instructable on creating lampshades and you can check out their own site too
https://www.instructables.com/3D-Printing-Lampshades-With-Full-Control-Gcode/
http://fullcontrolgcode.com/

Printed in Prusament Pistachio PETG

Wavy Lampshade

This is designed to be printed in vase/spiralise mode

Recommend increasing the number of bottom layers  just so the light attachment is nice and solid :)

There's also a version of this without the light fitting - can be used as a bowl/vase/tealight holder etc. you can find that here:


This was designed using full control gcode - if you'd like to know more, I've written an instructable on creating lampshades and you can check out their own site too
https://www.instructables.com/3D-Printing-Lampshades-With-Full-Control-Gcode/
http://fullcontrolgcode.com/

Printed in Greengate3D purple reign PETG

Wavy Lampshade.stl

Head Vase

Cute vase for displaying flowers - create different hairstyles using different plants! 

Recommend printing with at least 4 perimeters and using PETg if you want it to hold water though they look great with dried or fake flowers in too!

Use supports from buildplate so the chin is supported, everything else will print fine without!

wavy bowl (vase mode)

An easy to print wavy bowl to be printed in vase/spiralize mode

model in photos is printed in GNVTNTP magic PLA

Intricate Patterned Vase

Inspired by depression glass, this is an intricate but easy to print design.

It's designed to be printed in vase/spiralise mode so no supports etc. needed

Print in the photos is printed using FiloAlfa Tigre PLA

Mother's Day Tokens

Mother's Day Token - Breakfast in Bed

Mother's Day Token Display Stand

A display stand for my Mother's Day tokens (find them here: )

It holds 3 of my tokens - I've made 5 plus a blank in case you want to add your own text. I'm also happy to make more so give me a shout if there's something you really want and if a few people want the same then I'll make it :)

The display stand prints upright with no supports and the tokens simply slot in. I printed mine with a filament change for the text but they look nice in one colour too!

There are 2 files, the only difference is that one says 'Mom' like the print in the photos and the other says 'Mum' for my fellow Brits and Aussies (and anyone else who prefers 'Mum'!

Mother's Day Token Display - Mom

Jigsaw Vase 4 parts Voronoi

A slot together 4 part Jigsaw Vase.
This is a collaborative design with 3DPrintBunny.
Print in vase mode.
Download the Voronoi part (printed in mystic green) on this page and the plain Swoosh part (seen in black) here: 

Jigsaw Vase 6 part Facets

A slot together 6 part Jigsaw Vase.
This is a collaborative design with 3DPrintBunny.
Download the faceted part (printed in gold) on this page and the loopy part (seen in purple) here: 

Voronoi (Easter) Egg

1 of 8 eggs I've made for Easter/Spring celebrations, neat little things for decorating or for egg hunts etc.
You can find the rest on my profile

Shouldn't need supports

Dotty (Easter) Egg

1 of 8 eggs I've made for Easter/Spring celebrations, neat little things for decorating or for egg hunts etc.
You can find the rest on my profile - none of them should need supports

Crackle (Easter) Egg

1 of 8 eggs I've made for Easter/Spring celebrations, neat little things for decorating or for egg hunts etc.
You can find the rest on my profile, they're also shown in the pictures

Shouldn't need supports - the models pictured were printed without

Bobbly (Easter) Egg

1 of 8 eggs I've made for Easter/Spring celebrations, neat little things for decorating or for egg hunts etc.
You can find the rest on my profile

Shouldn't need supports - the models pictured were printed without

Stone (Easter) Egg

stone egg flat base.stl

Crumpled (Easter) Egg

1 of 8 eggs I've made for Easter/Spring celebrations, neat little things for decorating or for egg hunts etc.
You can find the rest on my profile, they're also shown in the pictures

Geometric (Easter) Egg

Patterned (Easter) Egg 

crumpled twist vase

A twisted, tapered vase to be printed in vase mode or as a standard print if you want something chunkier and watertight



Crumpled Vase

This can be printed in vase or mode or just as a normal print if you want something chunkier and more watertight.

No need for supports etc

Model in photos is printed in 3DJake Magic PLA

Wavy Pot

wavy pot

Hidden Message Easter Egg

This Easter Egg appears plain at first glance but pop a light inside or behind it and see the pictures and secret message shine through! 

Very straightforward print, just set infill to 100% to make sure the infill pattern doesn't show - no need for supports!

Helicone Toy

Helicone Assembled.stl

Spiral (Easter) Egg Box - Easy Print, No Supports

Egg Whole (DO NOT PRINT)

Pi Pie Raspberry Pi Case (Easy Print Version)

simple pie lid.stl

Pi Pie Raspberry Pi Case

pie lid

Spiral Bowl (Support Free)

An easy to print, decorative bowl.

No supports are needed for this model - you shouldn't need a brim or anything else either! 

Simple Chain

simple bracelet chain **do not print this file**

Faceted Antique Style Bowl (Easy Print Vase Mode)

An old fashioned style bowl designed to be printed quickly and easily in vase/spiralise mode. 

When printed in a transparent filament in vase mode it comes out very clear, almost like glass!

Prints pictured were printed at 150% scale in Filoalfa glitter PLA using a .4 nozzle however this would come out great scaled up further, especially using a larger nozzle.

Checkerboard Pattern Tealight Holder or Vase

A simple cylindrical pot/vase (depending on how you scale it) with a subtle checkerboard pattern.
The pattern is subtle and shines through more beautifully with a tealight inside/light behind it.

Photos shown are of the model printed at 80% scale in filoalfa tigre which is a translucent PLA

Giant Valentine's Candy

Valentine's Sweets

Hexagon Pattern Vase

Organic wavy vase shape with a geometric hexagon pattern

Suitable for vase mode printing

Model pictured printed in 3D tomorrow anthracite grey

Tree Trunk (Wood Texture) Vase

An organic tree trunk shaped vase with a subtle wood grain texture

Suitable for printing in vase mode - recommend a larger nozzle/line width and at least 3 bottom layers if you want it to hold water.

Pictured model printed in Eryone Wood PLA

Textured Square Twist Vase.stl

A simple vase with a rippled, bubbly texture

This model is a perfect print for showing off the two tone filaments from 3D Jake, Matterhackers and 3DFilaPrint!

Model in the pictures is printed in 3D Jake's Deep Space PLA

Model is solid and should be printed in vase mode with at least 2 bottom layers. If you want it to hold water, I'd recommend a larger nozzle and more bottom layers.

Dragonfly Spinner Flying Toy

Dragonfly Spinner.stl

Sylvanian Families (Calico Critters) Bed

Bed+One+Piece.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

Arkay_Prints

Achievements

Fan Favorite

Sapling

Voyager