Flat File Containers
 _____________________________
Used to organize, divide, and store pins / tools in flat file storage containers
_____________________________
**My print parameters** 
- 100% Infill
_____________________________
**Want to support what I do?** Follow me on social media: [Links](https://andrewsanker.com/links)
____________________________
**Designed by** Andrew Sanker


Please Credit any and all Remixes of my designs: AndrewSanker

Flat file containers v5.stl

LED Pixel Strip Holder (Glue Version)
 _____________________________
This holder is made to space / glue down Pixel LED strands. this version 
_____________________________
**My print parameters** 
- 100% Infill
_____________________________
**Want to support what I do?** Follow me on social media: [Links](https://andrewsanker.com/links)
____________________________
**Designed by** Andrew Sanker


Please Credit any and all Remixes of my designs: AndrewSanker

LED Pixel Strip Holder (Glue Version)

string light hook v1.stl

medium Container
 _____________________________
This print is intended to be put on two hooks on either a peg board or other hook boards for holding/displaying stickers or other items. 
_____________________________
**My print parameters** 
- 100% Infill
_____________________________
**Want to support what I do?** Follow me on social media: [Links](https://andrewsanker.com/links)
____________________________
**Designed by** Andrew Sanker


Please Credit any and all Remixes of my designs: AndrewSanker

Medium pegboard bin

Sticker Bin big.stl

Small Container
 _____________________________
This print is intended to be put on two hooks on either a peg board or other hook boards for holding/displaying stickers or other items. 
_____________________________
**My print parameters** 
- 100% Infill
_____________________________
**Want to support what I do?** Follow me on social media: [Links](https://andrewsanker.com/links)
____________________________
**Designed by** Andrew Sanker


Please Credit any and all Remixes of my designs: AndrewSanker

Small pegboard Bin

Sticker BIn Small.stl

 _____________________________
This print is intended as a tool to side stack milk creates creating shelving units. They are designed to go on the sides instead of corners to accommodate more variations of milk creates. The slots to connect the milk creates are 3.15mm wide (.124in),  9.8mm deep (.386in)
_____________________________
**My print parameters** 
- 55% Infill
_____________________________
**Want to support what I do?** Follow me on social media: [Links](https://andrewsanker.com/links)
____________________________
**Designed by** Andrew Sanker


Please Credit any and all Remixes of my designs: AndrewSanker

Milk Create Stacker

 _____________________________
Cable staple with a smooth saddle to hold down cables safely without damaging cables. There Is a hole for a screw or nail to mount the cable staple to the wall
_____________________________
**My print parameters** 
- 55% Infill
_____________________________
**Want to support what I do?** Follow me on social media: [Links](https://andrewsanker.com/links)
____________________________
**Designed by** Andrew Sanker


Please Credit any and all Remixes of my designs: AndrewSanker

Cable Staple

 _____________________________
Cable staple with a smooth saddle to hold down cables safely without damaging cables. There Is a hole for a screw or nail to mount the cable staple to the wall
_____________________________
**My print parameters** 
- 55% Infill
_____________________________
**Want to support what I do?** Follow me on social media: [Links](https://andrewsanker.myportfolio.com/contact)
____________________________
**Designed by** Andrew Sanker


Please Credit any and all Remixes of my designs: AndrewSanker

__________________________
Behringer Powerplay P16 Personal mixer mounting plate to mount a P16 mixer to a 2x4 at a 45-degree angle. The base plate has three holes on the bottom that align with the mounting holes of the P16 mixer to connect it to the mounting plate. The mounting plate then slots onto a 2x4 where you can screw in the 2x4 with the three screw holes on both sides of the mounting plate.
_____________________________
**My print parameters** 
- 100% Infill
- Supports under the screw holes/access hole
- Printed with Protopasta's Still Colorful 011 Recycled PLA 1.75mm
_____________________________
**Want to support what I do?** Follow me on social media: [Links](https://andrewsanker.com/links)
____________________________
**Designed by** Andrew Sanker


Please Credit any and all Remixes of my designs: AndrewSanker

Behringer Powerplay P16 45° Mounting Plate

Behringer Powerplay P16 Personal mixer mounting plate to mount a P16 mixer to a 2x4 at a 45-degree angle. The base plate has three holes on the bottom that align with the mounting holes of the P16 mixer to connect it to the mounting plate. The mounting plate then slots onto a 2x4 where you can screw in the 2x4 with the three screw holes on both sides of the mounting plate.

____________________________
Behringer C-2 mic mounts made to screw into the wall, floor, or other surfaces and add a 30 Degree slant to the mic.
_____________________________
**My print parameters** 
- 25% Infill
_____________________________
**Want to support what I do?** Follow me on social media: [Links](https://andrewsanker.com/links)
____________________________
**Designed by** Andrew Sanker


Please Credit any and all Remixes of my designs: AndrewSanker

Behringer c-2 mic mount v1.stl

Behringer c-2 mic mount Front stage 2 v3.stl

Behringer c-2 mic mount Front stage v2.stl

_____________________________
Cable Hook with holes for velcro, and holes to screw into the wall. 
_____________________________
**My print parameters** 
- 55% Infill
_____________________________
**Want to support what I do?** Follow me on social media: [Links](https://andrewsanker.myportfolio.com/contact)
____________________________
**Designed by** Andrew Sanker


Please Credit any and all Remixes of my designs: AndrewSanker

Velcro cable hook.stl

Cable Hook with holes for velcro, and holes to screw into the wall. 

cable hook VELCRO.stl

Cable Hook with holes for zip ties, and holes to screw into the wall. 55mm long 55mm tall 15mm wide
_____________________________
**My print parameters** 
- 55% Infill
_____________________________
**Want to support what I do?** Follow me on social media: [Links](https://andrewsanker.myportfolio.com/contact)
____________________________
**Designed by** Andrew Sanker

Zip Tie Cable Hook V2.stl

Cable Hook with holes for zip ties, and holes to screw into the wall. 55mm long 55mm tall 15mm wide

_____________________________
Cable Hook with holes for zip ties, and holes to screw into the wall. 55mm long 55mm tall 15mm wide
_____________________________
**My print parameters** 
- 55% Infill
_____________________________
**Want to support what I do?** Follow me on social media: [Links](https://andrewsanker.myportfolio.com/contact)
____________________________
**Designed by** Andrew Sanker


Please Credit any and all Remixes of my designs: AndrewSanker

Zip Tie Cable Hook V1.stl

Cheese.stl

Graphic designer, light designer, and all-around tech enthusiasts.


Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

AndrewSanker

Achievements

Seedling

Debutant