Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2954920.

Not all of my filament spools fit the shaft of the original Tevo little monster spool holder. I therefore designed a multi-spool holder where I re-used the bracket. It is made so I only need to make a new shaft if I get a filament spool with other dimensions. The only thing that must be applied to each new shaft is the key width (square at the end of the shaft 10 mm x 10 mm)


You need the following 3D printed parts:

1 EA Baseplate.stl
2 EA Tension nut
1 EA Spool shaft Ø19 MM.stl



You will need the following hardware parts:

2 EA M4 nut
2 EA M4 x 40 hex bolt
1 EA Rubber sheet for friction (2mm x Ø45mm rubber with Ø4.5mm hole in center)



Tevo little monster spool holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:805452.

24/04-2017:
Changed the name of the tool because of the old name was long and weird

I needed a sanding tool to get to confined spaces, it is also good to have a little manually sanding tool when sanding down parts you do not trust power tools are accurate enough to perform the job

Wedge sanding tool

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4722808.

Designed a new Makita RT700 router for my Openbuild C-beam cnc as I do not like the original bracket. There was too much slack and movement in the original bracket, which meant that I had major problems milling aluminum.

After I mounted the new bracket, it was noticeably stiffer and I managed to mill aluminum on the first try. See picture of test milling on scrap plate.

Makita RT700 openbuild cnc Bracket

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1591635.

I Needed a tool to dismantle Hausken jakt JD 224 cal. 30-06 silencer so I can clean it after a trip on the shooting range or hunting trip.

The tool is designed so you can use a ratchet with a 6mm x 6mm pipe square. Outside square is intended to use with a wrench

silencer disassembly tool for Hausken jakt JD 224  cal. 30-06  

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Ameister

Tevo little monster spool holder

Wedge sanding tool

Makita RT700 openbuild cnc Bracket

silencer disassembly tool for Hausken jakt JD 224 cal. 30-06