Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4610776.

This is a master spool designed to be used with the inland spooless filament.

It is held together with 6 x 6-32 machine screws and the accompanying nut. I used 3/4" however anything down to a 1/2" (~11mm) screw should work.

Inland Master Spool

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4592880.

I was looking for a simple way to mount the lighthouses using either nails or command strips. I used the same wedge based system as other designs. I made the base with the angled nail holes similar to a picture hanger and made the base large enough to hold multiple command strips to ensure it stays attached to the wall. I have tested both methods and both stayed up without any issues for multiple months.

Vive Lighthouse Nail / Command Strip Wall Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4591815.

This is a spool holder for the Ender 3 that uses a hard drive motor as a bearing.

I am not sure if there is a standard size motor in most hard drives but we built two of these with motors from completely different drives and both had the same dimensions. If your drives are a different size I have included the Fusion 360 model for you to modify. 

To mount everything 6-32 machine screws, I used 3/4" and then cut a few of the critical ones to length. 

Materials Required:

1 x Hard drive motor (with spindle mounting plate and screws)
1 x HDD_Ender3_Backplate
1 x HDD_Motor_Holder
1 x HDD_Spool_Holder
6 x 6-32 machine screws
6 x 6-32 machine screw nuts


Ender 3 HDD Motor Spool Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4591024.

This was just a simple gear system that I created while experimenting with creating gears in Fusion 360.

They were designed using a 6-32 x 3/4" machine screw.

Gear

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1401176.

This is a mount and cover for the Planck formed bottom (http://ortholinearkeyboards.com/planck/planck-formed-bottom)

teensey cover and mount for Planck formed bottom

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4594305.

This was a simple piece used to hold a laptop that was being used as a server underneath of a wire rack. 

Wire Rack Laptop Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4594297.

Inspired by Adam Savage's one day build of a Rhombic Dodecahedron I wanted to create one as well.

All that is needed is 12 of the Bilinski_Dodecahedron_Sides printed out and some glue to hold them together. 

Bilinski dodecahedron

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4625695.

A simple multipart design of a truncated cuboctahedron. The pieces will need to be glued together.

Truncated Cuboctahedron

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4594311.

This is a Simple mount for the Wyze motion Sensor. 

The adhesive holding ours up was failing and it was detecting a little further than we wanted so I designed this to both secure it to the wall and to block part of the field of view where we didn't want it detecting. 

The screw holes were just made for some random screws that were found and as such I have included the Fusion 360 file so that you can change the size of those to fit your screws as well as to adjust / remove the field of view blocker.

Wyze Motion sensor Mount

Vive lighthouse wall mount for use with small nails or command strips. Based on this design: https://www.thingiverse.com/thing:3112208

Vive_Wall_Mount_Base.stl

Vive_Wall_Mount_Puck.stl

Frame parts to create a nanoleaf like light fixture

TestFrame.stl

Corner.stl

Straight.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Amazing3D

Achievements

Seedling

Explorer