Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5430969.

Smaller GPU Support Bracket with FreeCAD Project Source

Not quite a remix, but a complete rebuild from scratch.

Smaller GPU Support Bracket with FreeCAD Project Source

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5430188.

Trellis For Small Plants with FreeCAD Project Source

Use wire to connect the parts and built the final trellis!

Trellis For Small Plants with FreeCAD Project Source

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5430869.

Tiling Trellis with FreeCAD Project Source

Parts can be connected to each other using wire.

Tiling Trellis with FreeCAD Project Source

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5430873.

Cross Style with FreeCAD Project Source

Parts can be connected to each other using wire.

Cross Style Trellis with FreeCAD Project Source

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5431030.

Plant Support For Small Plants

Plant Support For Small Plants

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5157386.

25mm Pipe Clip with FreeCAD Project Source

25mm Pipe Clip with FreeCAD Project Source

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5153724.

AGM Battery Mounting Bracket with recessed screw hole.

Print 4 and screw them into whatever you want!

AGM Battery Mounting Bracket

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5160345.

Provides GoPro mount points at 90 degree angles.

GoPro Multi-Adaptor

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5160141.

I found my original cooler to me too bulky so I have designed a new one which is smaller.

70mm GoPro Cooler

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5172898.

Stop The Spread - Grabby Pushy Hook

Pointy end for pushing buttons.
Hook for opening doors.

What's new?
Added a new grip to the handle!

Stop The Spread - Grabby Pushy Hook - V2

Build Timelapse:
https://www.youtube.com/watch?v=NhmskLMrEFc

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5100268.

I found that the original box had a tendency to break over time, various parts have been modified.

Version 7 of the Self Latching Rugged Box.

Whats new?

- Latches are now closer together and have been moved slightly closer to the middle.

Note: Due to the change in latch location this version is not compatible with earlier versions.

Remix of “Parametric Rugged Box” by thesamenametwice
https://www.thingiverse.com/thing:4757317

Self Latching Rugged Box - Compact Latch

Build Timelapse:
https://www.youtube.com/watch?v=SzF4oQkwPSs

This is a part I have designed to make it easier to mount my camera when making time lapses of my prints.

I have found it difficult to prevent the camera from shaking when recording timelapses, this part should let me mount it using additional clamps.

Remix of “GoPro customizable mounts” by mooncactus
https://www.thingiverse.com/thing:62800

GoPro Timelapse Stabilizer

GoProStabilizer.obj

defaultobject

This is the single latch bottom part box part.

Build Timelapse:
https://www.youtube.com/watch?v=kJ1dQHGsWiY

Top Part:
https://thangs.com/Aedazan/SingleLatchTopobj-36517

Bottom Part:
https://thangs.com/Aedazan/SingleLatchBottomobj-36518

Remix of “Parametric Rugged Box” by thesamenametwice
https://www.thingiverse.com/thing:4757317

Self Latching Rugged Box - Single Latch Bottom

SingleLatch-Bottom.obj

This is the single latch top part of the box.

Build Timelapse:
https://www.youtube.com/watch?v=kJ1dQHGsWiY

Top Part:
https://thangs.com/Aedazan/SingleLatchTopobj-36517

Bottom Part:
https://thangs.com/Aedazan/SingleLatchBottomobj-36518

Remix of “Parametric Rugged Box” by thesamenametwice
https://www.thingiverse.com/thing:4757317

Self Latching Rugged Box - Single Latch Top

SingleLatch-Top.obj

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5041819.

Simple and easy to print set, just resize as needed.

Fork Build Timelapse:
https://www.youtube.com/watch?v=C1ibRRcYpTk

Knife & Fork Set

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5035574.

Snug Lid Fit Electronics Box

Prints in two parts, the main box and a snug fitting lid that mostly self-seals.

Build Timelapse:
https://www.youtube.com/watch?v=EuUbv4K6ySg

I added waterproofing post print so my box can withstand the elements.
I created my own 'lacquer' by dissolving gold colored ABS in solution with acetone and painting it on.

Snug Lid Fit Electronics Box

Build Timelapse:
https://www.youtube.com/watch?v=XzbnaMdwFvs

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5039943.

I found that the original box had a tendency to break over time, various parts have been modified.

This project includes version 5 & 6.
You should print depending on the style you like.

1. The front section has had its latching mechanism redesigned to utilize static friction to stay closed instead of bending each time its opened and closed.
2. The front section was not as robust as I needed so I added additional padding.
3. I found it difficult to get the two parts together so I added a small gap at the hinge section.

Remix of “Parametric Rugged Box” by thesamenametwice
https://www.thingiverse.com/thing:4757317

Self Latching Rugged Box - Standard

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Aedazan

Achievements

Seedling

Up and Coming