The SH01s and Comgrow 2-spool dryers are decent out of the box and get the job done, but anyone who owns one knows that the fan just doesn't circulate enough air, leading to uneven drying and inaccurate readings.

Based on Anselor's Design (https://www.printables.com/model/734639) I decided to beef up the fan by strapping on a 5015 blower with a duel vent. The difference in circulation is a VAST improvement.

THIS WILL REQUIRE MODIFICATION TO THE ORIGINAL SHELL SO PLEASE PROCEED AT YOUR OWN RISK:
1 - The two towers that hold the original fan in place need to be removed.
2 - With the controls facing you, the back left support "fin" needs to be filed down or cut to make room for the fan.
3 - The standard wiring for 12V 5015 blower is barely long enough to reach the controls. It's tight, but you can get away with not messing with it. You may need to add an extension. 

5015 Blower Upgrade for 2-Spool Filament Dryer (SOVOL/Comgrow)

ComgrowDryer.5015.Insert.stl

Experience an upgraded workspace with the Multiboard Mount for Creality Sonic Pad, available on thangs.com. This unique 3D model is designed to level up your creativity, showcasing judicious design acumen with its ability to incorporate your Sonic Pad onto your multiboard wall. This innovative product falls under the "3D Printers/Creality" category and is tailored to enhance efficiency. The fine print of the model exhibits outstanding precision and workmanship. Not only your tools and paint but your Sonic Pad too can have fun on the multiboard wall now. The parts used are sourced from multiple places before being pieced together in this refined design. Excitingly versatile, you are most welcome to share your customizations or remixes of this 3D model. The model was printed using PETG at a profile setting of 0.20 for admirable sturdiness. Boost your creativity and workspace with this unique 3D model from thangs.com. Check out our model images for a clearer understanding of what you'll get.

Multiboard SonicPad Mount.stl

Fits a standard NoClogger (or homebrew) with 1.5-2mm rod. This was made with a slight modification to the standard L-bracket available on Multiboard.io (Thanks, @KeepMaking!). Mounts to a Multiboard tile using a small thread screw.

Multiboard NoClogger Rack

NoClogger.Hanger.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

AdvenDrew

Achievements

Voyager

Seedling

5015 Blower Upgrade for 2-Spool Filament Dryer (SOVOL/Comgrow)

Multiboard SonicPad Mount.stl

Multiboard NoClogger Rack