Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6251352.

Here’s a nice display stand I made for 3D logos out there available online. The photos I posted show two of my logos that will be available on my account, too. 
It’s an easy print that doesn’t require supports. No raft is needed. I used a brim instead. 
It takes one hour to print.

Logo display stand AXM

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5389923.

A 3D stand for the AXM Starliner / Centaur papermodel.

3D stand for AXM Starliner

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5364404.

This is a simple replica of the famous Guitar Hotel from the Seminole Hard Rock Hotel and Casino, located in the city of Hollywood, Florida, USA. 

Was inaugurated in October 2019. It's 450 feet tall (137 mt), designed as back to back guitars, with guitar faces and bright lit strings. Being a Florida resident, my family and I enjoy going to visit this hotel not only for fine dining but to enjoy the light show, showcasing the LED lights built into all the sides of the building.

I didn't use any blueprints or diagrams. Everything was done with photos of the building in order to make this model. The model size is about 13.5 cm tall. It takes aprox 10 hours to print, depending on the infill you use. 

Printer: Ender-3

Filament: PLA

0.2 mm resolution

10 % infill

Print speed 30mm/s

Wall line count 3

No supports

 

I had some printer problems with bed adhesion and some layer shifting at the top of the model, that's why the model shown is not a perfect one.  Once I fixed some issues, I scaled up the model by 120 % and the overall look of the model was better, specially the spikes at the top of the tower (photo shown). 

It is still a work in progress. I plan doing an improved hollow version of the model using clear filament and adding some LED lights at the bottom to showcase the changes in light like the real building. Please do not sell this model. It's only for personal use.



Guitar Hotel

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4521427.

This is my first 3D design based on a diagram from Rafael Adamy. The model is a ring that goes at the bottom of the engine section of the SpaceX Starship SN5. This is a work in progress. The intention is to complete the ring with the leg supports or hinges and the articulated legs.
The model is a 1:100 scale with a diameter of 90 mm. 
For those who know me as a paper model designer, this plastic ring can be added to my Starship paper model from my website. I still need to modify it so it can be attached. My models can be a mixture of paper and plastic. We'll see how it goes.




Starship SN5 engine bottom ring

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4608856.

This is the tank test stand for the Starship SN 7 variant. The design consists of two rings with vertical and diagonal struts that join the two rings.
The model needs to be 3D printed upside down with the support legs facing upward. No need for supports on the slicer settings.
There will be some stringing but is not that important. The model will print fine.

Check my website to download the Starship SN 7.1 that goes with this stand.
http://axmpaperspacescalemodels.com/index.php/spacex-starship/product/Starship%20SN%207.1/?

SN 7 Tank Test Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5347660.

This is a stand compatible with the AXM Space Shuttle orbiter with open payload. It is based on the actual stand for the Atlantis attraction at Kennedy Space Center, with the same degree inclination of 43.21 degree.
It's a simple design of only two pieces. Now you can display your AXM Shuttles. Enjoy!

Update as of May 8, 2022: Version 2
Both supports now are beveled and a third component has been added. The bottom section is glued to both vertical supports, making it easier to put the Shuttle model on top of the stand.

Final update as of May 17, 2022: Version 3
Now you can use magnets instead of glue. All three stand components have perforations for magnets. The magnets to be used need to be 2 mm in diameter and 1 mm in depth.

3D stand for AXM Space Shuttle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5459121.

I was inspired by loringczroby's beautiful work on his PackMan Boardgame, so I decided to make the Third level (my favorite) of MsPacMan with an appropriate size to fit my Ender-3 bed.
This board will need 3 colors: black, wood brown and white. It has 30 layers so you will need to add a "pause at layer height" twice to your g-code in order to change filaments. Start with black color, then at layer 27 change filament for wood brown color.
Last color change happens at layer 29 for white.

In the near future, I might make the other levels from MsPacMan in order to collect all 4 levels.

The rules on how to play the game are located here:

https://www.thingiverse.com/thing:5396911




MsPacMan Board game Third level

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5337941.

These are the Starship COPVs (Carbon Overwrap Pressure Vessels) in 1:100 scale to match my AXM Starship papermodels from my website.
There are two files, one is the large COPV and the other is the smaller COPV.
As per this post, these COPVs can be used to replace the paper versions of the B4 papermodel.  Notice the location of the COPVs on the B4 model.

Also, I have included the G-code for these files, so you can print all the larger COPVs in one print, and the same for the smaller COPVs.

Starship COPVs

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4588883.

This is the stand for the Starship SN series in 1:100 scale, as a joint project with Arco Hollestelle. It is a work in progress and will be updated with more features.
Print it in upside down position with no supports. 
Infill 20% with any pattern. Do not use concentric pattern.

Download the Starship SN paper model at:
http://axmpaperspacescalemodels.com/index.php/spacex-starship/

Starship SN stand

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

<div class="markdown"><p><a href="https://linktr.ee/axm61" target="_blank" rel="noopener nofollow">https://linktr.ee/axm61</a></p></div>

AXM61