Tamiya CW01 Front Double Wishbone Suspension
The original CW01 double wishbone front suspension (created in 2015) will allow you to upgrade your Midnight Pumpkin, Lunchbox and Montero. There are two variations of the arms (the shorter standard arms and the 8mm offset arms) that you can select there. You can also select single replacement arms (left and right are the same). Please see the installation video below which will cover all the hardware you will need to complete the installation.
Standard Offset: This option will maintain the same wheel track as the standard vehicle. Only tested with standard springs and Tamiya OEM oil shocks. 8mm Offset HD: The 8mm offset version increases wheel track by 8mm per side and gives more clearance for alternative shocks. This version has flanges for more strength.
You will need the COMPLETE SET if you are installing them on your CW01 for the first time. A-Arm replacements alone are also an option.
Color - All Nylon is white. Colors shown in video are painted (matte colors) as dyed options are expensive. MJF is grey. Clear coating (again, matte) is highly recommended as nylon is hygroscopic and absorbs water.
THE MJF PRINT MATERIAL IS NOT FLEXIBLE. CRASHES CAN BREAK THE ARMS. ONLY USE THE STANDARD SILVERCAN MOTOR WITH THESE ARMS.
Tamiya CW01 Front Double Wishbone Suspension
Tamiya ORV Rear Double Wishbone Suspension Conversion
Tamiya Frog Wing Mount for AMPro Rear Double Wishbone Suspension Set
Tyco (Taiyo) Baja Bandit Nissan D21 Front Double Wishbone Suspension Kit
Super Hornet, Rising Fighter and Grasshopper II Double Wishbone Front Suspension
Stock Replacement Hornet Double Wishbone Front Suspension
20mm Offset Hornet Double Wishbone Front Suspension
10mm Offset Hornet Double Wishbone Cantilever Front Suspension Set
Tamiya Blackfoot & Mudblaster Rear Body Mount Brace, Stock & Double Wishbone
Tamiya CW01 & Hornet Style Transmission Differential Locker / Spool
P2G3D Double_Tamiya_glue and paint_Mr. Surface holder.stl
Double Tamiya Glue Holder
Tamiya Falcon Rear Suspension Arms
Tamiya Kingcab & Monster Racer Rear Suspension Set with Swaybar Mount
Tamiya Hotshot Front and Rear Replacement Suspension
AMPro Tamiya Frog, Brat and Lancia Front Suspension
CLICK MACHINE - CLICKER FIDGET CAR KEYCHAIN
Gridfinity Tamiya Tape Dispenser Holder 6mm 1x2
Monster Beetle Rear Bodymount Brace
CW01 Transmission Brace & Lower Shock Mount
I ordered what I thought was the complete kit to finish the double wishbone suspension on a lunchbox. All I got was one a arm last week,so can you please sell me the left and right printed parts and then I can figure out the hardware from there I have two front so I need two front Components or sets or whatever you wanna call them not just one so whatever costs whatever it cost just put that on the order and charge me.