Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5426884.

I wanted to give my HEPA filter (link below) a better chance at getting any particulates caught, so I decided above the hot end was the best option. With the intake being at the bottom, I went with a plate with many slats in the bottom. I used 2 M4*10 screws and corresponding sized T-nuts to secure the plate. There are 4 holes to use it but that's mostly to give some freedom on where the screws go. The screws will also cut their own threads, so just keep going if they seem tight.

The high sides are basically to make sure it doesn't accidentally fall off, either from printer vibration or me being clumsy and knocking it off (the more likely of the 2). I haven't noticed the plate or filter move at all from vibration, not have I noticed a decreased in print quality due to the filter being present. 


HEPA Filter: https://www.amazon.com/gp/product/B08D9J1Y8K/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

HEPA Filter Plate

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5666961.

Simple remix of the great phone stand by totallynectar to make it a bit longer. It's sized for an iPhone 14 Pro with a rather large case as you can see. 

The fitting for the MagSafe charger panel is pretty snug so the phone is securely held by that and the charger itself. Extra clearance should give some wiggle room for different phone models and case sizes.

iPhone Magsafe Charger Stand Longer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5425196.

I needed a way to display the Collapsing Master Sword (link below) but couldn't find a pedestal. I used the base of the lock box, doubled the size, and used the widest blade as a starting point for the hole. After some trial and error, I found that adding just a millimeter or 2 on the X & Y worked the best. It's not perfectly snug but I'm able to hold the base at 90 degrees without the sword falling out so it's pretty secure. I also didn't to have to apply a lot of force to either secure or pull the sword from the base. I think it looks more impressive to effortlessly pull it out and have the sword extend on its own.

Collapsing Master Sword by 3dprintingworld: https://thangs.com/designer/3dprintingworld/3d-model/Collapsing%20Master%20Sword%20with%20Replaceable%20Blade-35659

Collapsing Master Sword Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5404644.

I needed a better way to store by bottle brush so I decided vertical was the way to go. It's a simple thing but honestly my counter feels much less cluttered. I couldn't decide what shape would be a better base so I just made 2. Both are the same sizes, apart from the base.

Bottle Brush Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5210494.

Basically I needed to make a lid for that wonderful trash can to keep my cats out. I made a small version for used hobby blades and other sharp/dangerous items so they couldn't later become toys. Its scaled to the original size of the model, so tweak the X/Y based on your wall count and thickness.

Desktop Trash Can Lid

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

3danprinting

HEPA Filter Plate

iPhone Magsafe Charger Stand Longer

Collapsing Master Sword Stand

Bottle Brush Stand

Desktop Trash Can Lid