I sculpted this model with idea that you always uplift yourself with one hand, and then push yourself down with the other. It is a symbolic model. I hope you enjoy this model and that it speaks a thousand feelings upon you.

THIS MODEL AND STL FILE IS NOT TO BE SOLD You will need to become a member if you want to sell the physical Print.

Instructions
layer height .16
walls 2
infill 5%
supports yes - Auto/manual tree slim

If you print this Model, please share it with me or upload your make !

Day Dreamer -Free Model - By 3digiprints

Day dreamin.stl

Enjoy this jack-o-lantern/grim Reaper styled sculpt! This is part of my 30 sculpts in 30 days! This is a free model! It includes a .3mf file as well! It has moving legs and it is completely print in place with zero supports.

THIS IS NOT FOR SALE NOR ARE PHYSICAL PRINTS. IF YOU WANT TO SELL THE PRINT YOU HAVE TO BE A MEMBER OF MY PAID THANGS TIER

INSTRUCTIONS:
.2 or .16 Layer height
infill 15% or higher
Walls 2
 Classic Wall generator mode
No supports



Pumpkin Trick or Treater - Free File - By 3digiprints.3mf

Pumpkin kid.stl

<p dir="ltr"><span style="white-space: pre-wrap;">I hope everyone is doing well! I would love to have feedback on models. I am curious if the variety of sculpts, minis, and practical prints is nice.</span></p>

 I hope everyone is doing well! I would love to have feedback on models. I am curious if the variety of sculpts, minis, and practical prints is nice.

Get access to unlimited downloads!!! Includes commercial licenses + access to my exclusive discord!

You have hurry though this plan locks after a certain number of members join!!!

UNLIMITED Limited Plan

Are you a Merchant??? Well, this plan is for you! Get access to commercial Licenses to sell my prints!  PLUS 20 Monthly Downloads!!!

Personal

Unleash the power of the Giga GyroHex Spinner! 
 --------------------------------------------------
-Easy to print!
-Prints in Place
-Relaxing 
-Fits on a 180mmx180mm build plate
--------------------------------------------------
Model Print Time and Filament Usage
Print time Averaging 5-8 Hrs
Filament Usage 250-400 Grams
--------------------------------------------------
Print Instructions:

It is already oriented in the way it should print.
If not make sure it prints with all 3 rings on the build plate. The base should be laying on its side.

Layer Height - .16 - .24 should work just fine. (I did .12 and it turned out terrible !!!)

Infill minimum 15% increase for a more weighted experience

Nozzle Size was designed for a .4 Nozzle

---------------------------------------------
Enjoy! Please share your makes with me I would love to see them! Tag me and I'll repost it on my story!






Giga GyroHex Spinner.stl

Giga Gryo Base.stl

Is it back to school time already!?!?! Maybe you're in school or have kids, this will fit your basic storage needs! Every Part of this pencil has a purpose. There are 3 main storage parts to this pencil! The eraser, the pencil body, and the tip!  I love this thing and I will be making more variations of it! Please I hope you enjoy it and I would to see your makes!
 
Parts Required
Only PLA/Filament!
I used polyterra for the Eraser and Body! This is Polymakers brand! For the tip I used a matte black and beige from bambulab! The Silver is from Inland Filament!

Instructions! PLEASE READ OR RESULTS MAY BE BAD

UPADTED 8/24/24/
Layer Height has to be .2 or smaller. If you are running into issues with quality with the threads. ALSO DO NOT PRINT AT MAX SPEED OR YOU WILL GET BAD RESULTS. THE MODEL IS PRINTABLE!!! ADD BRIMS TO THE PENCIL BODY

To get best results-
layer height - .16
Walls - 3
wall generator type-classic
infill do 45% or higher will help with threads.
Brim on pencil body
supports manual on metal eraser band and the pencil tip. do not have it do supports on threads manually add them. 
Speed- do not go as fast as you can. I would recommend something slower along 150mm/s



There are .3mf files for the tip and the pencil body!
Everything was designed to print with no adjustments to positioning!

The Eraser is print ready and does not require any additional supports!
The Body will need inner and outer brims to secure it the bed plate! no supports required. I would consider slowing down your print speed for the body.

The Metal band prints better if you paint supports in the middle where there is a bridge.
I would use tree supports and pull it off the bed while the bed is hot! Additionally consider using a brim for better support

The Tip also requires supports. Only Paint the supports on the underside of the cone just past the threads! This will form a better connection to the body. However, I did get away without using supports on this!

Check Additional instructions to see what I used!

Happy Printing and Remember Please share your makes!!!

Pencil Pencil Holder (over a foot long!) by 3digiprints

Metal Band.stl

Pencil Holder Eraser.stl

Pencil Holder Tip.stl

Pencil Pencil Holder Body 2 HB.stl

Colored Pencil Holder Tip.3mf

Colored Pencil Pencil Holder Body 2 HB.3mf

The ultimate way to get organized. I personally use this to hold my gaming controllers and headphones! However, it can be used for much more!!! This prints in one piece and does not need any supports! 

IMPORTANT!!!
If you are using it to hang controllers or headphones, I would Recommend using screws due to 3M Tape not being strong. Additionally, you have to place the controller in the second divot the one furthest from the wall. Controllers may fall out if there is an earthquake or lots shaking in the room. Just be mindful and while using it.

Instructions: 
Layer height .16 If you do anything above this you will run into problems.
Walls 2.
Wall generator classic. If you have it on anything else, you will not get good results.
Supports No
Brim No

Please share your makes! I would love to see them!



Snap Open Wall Hangar-Print in Place- No supports.stl

Day dreamin .3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

3Digiprints

Achievements

Seedling

Explorer

Designer posts

Hey

Pinned models

Giga GyroHex Spinner.stl

Pencil Pencil Holder (over a foot long!) by 3digiprints

Snap Open Wall Hangar-Print in Place- No supports.stl

Day Dreamer -Free Model - By 3digiprints

Day Dreamer -Free Model - By 3digiprints

Pumpkin Trick or Treater - Free File - By 3digiprints.3mf