This model is a mask from Star Wars. The mask belonged to the attendants were a group of mute alien navigators used by various factors in the Unknown Regions. You can learn more about this character here: https://starwars.fandom.com/wiki/Attendants

This model is a wearable mask with shell. The shell is there to hold the shape for a piece of cloth that you put over it. It is quite big and is meant to be post-processed.

Files contain pieces of the helmet ready to be 3D printed and complete helmet files that are not cut into smaller pieces.

SCALE

At 100% scale the helmet’s inside dimensions are:

Width approx. 160 mm

Length approx. 240 mm

Outside dimensions:

Height approx. 384 mm

You can scale the model according to your head measurements. It is good to make it bigger and then add cushioning to the inside for a snug and comfortable fit.

PRINTER SETTINGS

As the helmet is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the helmets shell parts, because of their height and low thickness. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.

If you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com/preorder

Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. Here are some links to our social media where you can join our community or just look at more of our creations:

3Demon