Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5400601.

Current:  The new rendition of this print will allow for the charger to connect to the battery while on the wall hanger.

Past Mods:  (https://www.printables.com/model/198372-blackdecker-18v-battery-mount): This a remix of B_3D's Black&Decker 18V (Old) Battery Holder https://www.thingiverse.com/thing:5021043

When I printed B_3D's model it was near impossible to get the battery on the holder due to it being tight.  I've modified the design so that the battery slides on easily.

If you have the newer 20V slim batteries, check out this mount:
https://www.printables.com/model/195662-blackdecker-20v-battery-holder

Black&Decker 18V Battery Holder/Wall Mount 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5440862.

Replacement ball valve handle for a Hayward pool system. I hope you find it helpful.  This replaces the handle SP-722-F. 100% infill. 6 walls.  Takes 4hrs 10 minutes at 50mm. PLA+

Hayward Ball Valve Pool Handle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5359662.

Baseball display stand based on a four sided pyramid.  Show off that "No Hitter" game ball or a great autograph you acquired. Posting photos of your printed work with the baseball would be much appreciated.

Check out my other baseball stands:

Three sided pyramid: https://www.thingiverse.com/thing:5359656
Circular: https://www.thingiverse.com/thing:5359629
Gear (COG): https://www.thingiverse.com/thing:5359665/edit

Baseball Stand - Four Sided Pyramid

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5395696.

Tired of cup lids being all over your cabinet?  This will keep them all together.

Cup Lid Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5359656.

Show off that "No Hitter" ball or a great autograph you acquired with this holder that is based on a three sided pyramid.  Posting photos of your printed work with the baseball would be much appreciated.

Check out my other baseball stands:

Four sided pyramid https://www.thingiverse.com/thing:5359662
Circular: https://www.thingiverse.com/thing:5359629
Gear (COG): https://www.thingiverse.com/thing:5359665/edit

Baseball Stand - Three sided pyramid

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5377526.

This is a remix of https://www.thingiverse.com/thing:2576381

I've added screw holes to accomodate drywall screws.

I would increase the size by 1% because the print is pretty tight.  But, if your batteries are in a mobile unit, the tight may be wanted.


Black&Decker 20V Battery Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5274022.

So, what we have here is a four tube propagation station for growing new plants.  It's a very easy print.  It is intended to be used with glass tubes that have a rounded end as there are divots in the bottom section to secure the tube.

I also have a two tube version which can be found at https://www.thingiverse.com/thing:5283615



Propagation Station 4

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5359665.

This is a baseball stand based on a gear design. Show off that great baseball achievement, such as a "No Hitter" or "Strike out record" to your friends.  Great for autographed baseballs you have acquired. Don't forget to upload a picture of your print with the baseball you will be displaying.

Check out my other baseball stands:

Four sided pyramid https://www.thingiverse.com/thing:5359662
Three sided pyramid https://www.thingiverse.com/thing:5359656
Circular: https://www.thingiverse.com/thing:5359629


Baseball Stand - Gear

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5359629.

This is a simple display stand for a baseball.  Baseballs can vary in size slightly, but not by much, so they should all fit.  Show off that great "No Hitter" ball you earned or a great autograph you acquired.  Posting photos of your printed work with the baseball would be much appreciated.

Check out my other baseball stand options:
Four sided pyramid: https://www.thingiverse.com/thing:5359662
Three sided pyramid: https://www.thingiverse.com/thing:5359656
Gear (cog): https://www.thingiverse.com/thing:5359665

Baseball Stand - "Round"

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5283615.

This is a simple dual tube propagation station for starting new plants. Glass tubes not included. The bottom has dimples so the rounded end glass tubes will stay in place.  

If you would like a larger, 4 tube propagation station, it can be found here  https://www.thingiverse.com/thing:5274022

Propagation Station 2

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

3D_Frank

Achievements

Seedling

Debutant