A small twisty magnetic fidget in fungi form.
 
**Customization**

_Effect Options_
- Click - The top and bottom halves of the fidget clap for a sharp click sound
- Rattle - Loose magnets rattle they jump between attract and repel pairs

_Magnet Options_
- 6x3mm magnets - Strongest force
- 3x3mm magnets - More click spots

_More Customization_
- [Mix and Match Twisty Fidget](https://thangs.com/file/1103228)

**Printing**
- Designed for 0.2mm layer heights
- All parts can be printed without supports
- Pause the print to embed magnets in the base - Make sure magnets are oriented so that both sides of the fidgets will pull together.
- Optional: when printing the 3x3mm version, alternate magnet orientation between attract and repel for fewer click spots and a stronger snap.

**Assembly**
- Test screwing the top and bottom core parts together to make sure they fit well. You may need to wear them in a little if they are too tight.
- If the core parts are too loose, you may need to add glue during final assembly. Keeping them unglued is recommended so you can reconfigure your fidget in the future.
- Glue magnets into the mushroom top.
- Lock the two sides of the fidget together with the core.

**Can I sell copies of this?**

Yes! This project was shared under the [Creative Commons - Attribution](https://creativecommons.org/licenses/by/4.0/) license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.

**Recommended Attribution Text**

"Mushroom Twisty Fidget" (https://3dprinty.xyz/project/126) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/)

Mushroom Twisty Fidget

Demo.3mf

A small twisty fidget with many mix-and-match grip styles and click effects.

**Customization**

_Grip Options_

- Plain - Great for adding your own text around the side of the fidget!
- Rib
- Scalloped
- Grip
- Gear
- Knurled
- Turbine
- Round

_Effect Options_
- Click - The top and bottom halves of the fidget clap for a sharp click sound
- Rattle - Loose magnets rattle as jump between attract and repel pairs

_Magnet Options_
- 6x3mm magnets - Strongest force
- 3x3mm magnets - More magnet holes for greater customization

**More Customization**
- [Mushroom Twisty Fidget](https://thangs.com/file/1103229)
- Use the included STEP files to create your own!

**Printing**
- Designed for 0.2mm layer heights
- All parts can be printed without supports
- Pause the print to embed magnets - Make sure magnets are oriented so that both sides of the fidgets will pull together.
- Optional: when printing the 3x3mm version, alternate magnet orientation between attract and repel for fewer click spots and a stronger snap.

**Assembly**
- Test screwing the top and bottom core parts together to make sure they fit well. You may need to wear them in a little if they are too tight.
- If the core parts are too loose, you may need to add glue during final assembly. Keeping them unglued is recommended so you can reconfigure your fidget in the future.
- Attach the two sides of your fidget so that the magnets pull them together.
- Lock the two sides of the fidget together with the core.

**Can I sell copies of this?**

Yes! This project was shared under the [Creative Commons - Attribution](https://creativecommons.org/licenses/by/4.0/) license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.

**Recommended Attribution Text**

"Mix and Match Twisty Fidget" (https://3dprinty.xyz/project/125) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).

Mix 'n Match Twisty Fidget

Demo - All Files - 3x3mm.stl

A 3D printed clicky fidget with a piano theme.

**Layout Options**

- _Test Print_ - A single key print useful as a mini fidget or to check your print settings
- _Minimal_ - 12 keys on a minimal base
- _Standing_ - 12 keys on a upright style base



**Magnet Options**

- 24 6x3mm cylinder magnets (2 per key)
- 48 6x3mm cylinder magnets (4 per key)



**Printing**

- All parts except for the D, G, and A keys can be printed without supports.
- Tested with 0.2 and 0.3 layer heights



**Assembly**

- Add magnets to the back of each key. For easier assembly, make sure all keys use magnets in the same orientation. Glue if loose.
- Optional: Add magnets to the bottom of each key.
- Add magnets to the back of the base. These magnets should be oriented to pull the key. Glue if loose.
- Optional: If you added magnets to the bottom of each key, install repelling magnets in the base.
- Slide keys on the base.
- Test all keys for a good click and proper alignment.
- If building the standing piano, attach both sides using 2 stand locks per side. Glue if loose.



**Can I sell copies of this?**

Yes! This project was shared under the [Creative Commons - Attribution](https://creativecommons.org/licenses/by/4.0/) license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.

**Recommended Attribution Text**

"Clicky Piano Fidget" (https://3dprinty.xyz/project/123) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).

Fidgets

Categories:

Models in this collection

Mushroom Twisty Fidget

Mix 'n Match Twisty Fidget

Clicky Piano Fidget