A 3D printed clicky fidget with a piano theme.
Layout Options
- Test Print - A single key print useful as a mini fidget or to check your print settings
- Minimal - 12 keys on a minimal base
- Standing - 12 keys on a upright style base
Magnet Options
- 24 6x3mm cylinder magnets (2 per key)
- 48 6x3mm cylinder magnets (4 per key)
Printing
- All parts except for the D, G, and A keys can be printed without supports.
- Tested with 0.2 and 0.3 layer heights
Assembly
- Add magnets to the back of each key. For easier assembly, make sure all keys use magnets in the same orientation. Glue if loose.
- Optional: Add magnets to the bottom of each key.
- Add magnets to the back of the base. These magnets should be oriented to pull the key. Glue if loose.
- Optional: If you added magnets to the bottom of each key, install repelling magnets in the base.
- Slide keys on the base.
- Test all keys for a good click and proper alignment.
- If building the standing piano, attach both sides using 2 stand locks per side. Glue if loose.
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.
Recommended Attribution Text
"Clicky Piano Fidget" (https://3dprinty.xyz/project/123) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).