Cute seal with a swiveling ball joint head.
Customization
Head
- Default
- Hat - Works with hats designed for the Snowman Fidget or Posable Penguin.
Printing
- Set seam position to random or place it around the back of the seal’s head.
- Add a very slight fuzzy skin to the head and body to add friction to the ball joint.
- To limit stare stepping at the top of the snowman head, use variable layer height or hide the a concentric top layer infill pattern.
- Add a brim when printing the eyes.
Assembly
- Glue eyes into the head.
- Hook a scrap of TPU (or similar flexible string) around the hook at the base of the head - use pliers if needed to pull the TPU through.
- Thread both ends of the TPU through the body and out through the bottom.
- Pull the TPU tight.
- Tie the TPU to keep it under tension.
- Trim the loose ends of the TPU.
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.
Recommended Attribution Text
"Swivel Seal Fidget" (https://3dprinty.xyz/project/128) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).