Linkage Construction Kit
Build and Test Linkage Mechanisms!
Parts
- Links - The primary component of a linkage
- Pins - Use these to connect links
- Base - Useful for laying out stationary points in a linkage
- Plates - Connect multiple bases together or elevate sections of a linkage
- Spacers - Add vertical space between linkages
- Bolt cap - Cap for an M2 socket head bolt
Custom Parts
Use the included STEP and Fusion360 template files to create your own custom parts and link lengths!
Printing
- Before committing to a long print with lots tiny parts, print only a couple test links and pins to make sure you get a good fit.
- Print all the links with at least 3 perimeters, so the outer wall and the inner wall of each hole merge into a single stronger frame.
- Print all links, bases, and plates at 100% scale. If the parts don’t quite fit, resize just the pins to fit everything else.
- For a smoother pin wall, manually place your print seam on the inner pin wall. If you have any adhesion issues, add a brim.
- Don’t rush the print speed.
- Look out for elephant's foot. Any extra squish on the bottom of a link will stop parts from fitting.
Assembly
This parts up to you!
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.