A panda recolor of the Articulated Bear Cub.
Customization
Head
- Default head
- Head with hat port - Compatible with many snowpeople hats
Printing
- Unlike the Articulated Bear Cub, which is easily printed on both single and multicolor printers, this design is only recommended on multicolor printers because the panda spots are not easy to print in pieces. Single color printers will probably get the best results by painting the panda spots instead.
- All parts can be printed without supports. However, the chest includes challenging overhangs that may benefit from supports on some printers.
- A 0.15mm layer height is recommended for cleaner overhangs.
- Head and chest have very little contact with the print bed. A brim may be useful to prevent these parts from detaching.
- Consider applying a slight fuzzy skin to outer walls for a furry look and a stronger grip when posing.
Assembly
- See the video above for a full assembly of the bear cub - this remix is the same process.
- If printing eyes, nose, and toes separately, glue these parts into place.
- Bear can be held together with a rubber band, scrap of TPU, round sewing elastic, fishing wire, or a printed TPU tie (model included in the files).
- After assembling the bear, you can close up the bottom port with the 3D printed plug. - Use a flathead screwdriver to lock the plug in place.
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.
Recommended Attribution Text
"Articulated Bear Cub Fidget" (https://3dprinty.xyz/project/141) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).