tracking pixel
Erin B

Halloween Big Beads

by
3DPmom
Follow
Follow
Remix Model
3DPmom
3DPmom
|
Image 1 of 6
Halloween Big Beads 3d model
3DPmom
3DPmom
|
Image 1 of 6
Halloween Big Beads 3d model
2D
3D
Makes
Halloween Big Beads 3d model
Halloween Big Beads 3d model
Halloween Big Beads 3d model
Halloween Big Beads 3d model
Halloween Big Beads 3d model
Halloween Big Beads 3d model
This model is restricted by licensing terms. 

Don’t be scared by the size of these big Halloween beads 👀 they are meant to stand out 🤩 I created 10 pairs of Halloween designs & each pair includes a bead for vertical stringing and horizontal stringing. These are perfect for trick or treating buckets/bags, keychains, labels for gifts, etc.

3D Print Settings: PLA works great Layer Height 0.16mm, Infill 15% No supports needed

Note: I recommend you turn on the ‘‘Detect thin wall’ setting in your slicer program.

Dimensions of beads: 1 inch diameter x ⅓ inch thick

Note: Beads can be scaled smaller or larger. When printed at 100%, the diameter of the hole in each bead is 3mm (just fyi.)

I have included a 3mf file with the following print profiles (please note each print plate contains two beads: one for vertical stringing and one for horizontal stringing):

Print Plate #1 (Pumpkin): two colors Print Plate #2 (Candy Corn): three colors Print Plate #3 (Bat): two colors Print Plate #4 (Ghost): two colors Print Plate #5 (Spiderweb): two colors Print Plate #6 (Spider): two colors Print Plate #7 (Cat): two colors Print Plate #8 (Eyeball): three colors Print Plate #9 (Witch Hat): three colors Print Plate #10 (Frank): two colors

Update 9/21/24: I attached a second 3mf file that should be used if you want to enlarge the beads. (I printed some at 600% and found I had some 'floating' areas due to the increase in size so I adjusted the files to fix this issue.)

Other items you will need: Elastic cord (1mm or 1.2mm thick recommended) Tassels Metal Keychain Clasp

Here is an Amazon link to this items if you need them: https://amzn.to/3Ldu0FD

How to print: You can use the beads on the plate you need and delete the ones you don’t need but I like to keep the original beads on each print plate and copy/paste the letters I need onto an additional print plate.

How to assemble the keychains: Secure the elastic string or cord to the metal clasp and thread letters on. Stretch the elastic string to make it a little tight and then tie the tassel onto the end.

Have fun printing!!


33 Likes37 DownloadsSeptember 20, 2024


33 Likes37 DownloadsSeptember 20, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.16mm

MaterialPLA
Layer height0.16 mm
Infill density15 %
SupportsNone
BrimNo