SugarGlider.stl

Comes with 3 different colored files.

Print in place with no support and no assembly required. Just slice and print! Has been test printed down to 70%. Keychain stl added. Pre-painted file also included!

NOZZLE: 0,4 mm. LAYER: 0.16 – 0.20 OUTER WALLS: 3 INFILL: 10% SUPPORTS: NO Z-HOP: 0.8 BRIM: If necessary

If you would like to sell the prints, please join my Patreon. https://www.patreon.com/3dtinysprints