This is the Modular Vase with Circle Inlay of the Moduluma Lamp Ecosystem!

The Moduluma Ecosystem is a modular lamp system where vases, shades, inlays, and decorative elements can be freely combined to create countless unique designs. Every part is interchangeable, tool-free, and designed for easy assembly, making it possible to build lamps that suit your personal style.

The Circle Inlay for the Modular Vase introduces a clean, geometric pattern of rounded shapes. It gives your lamp a softer, playful appearance while maintaining a modern aesthetic, making it a versatile choice to pair with both organic and structured shades.

How to Print: Print the plate as it is. These inlays are made for the Modular Vase (not the Modular Vase Big). Since parts are mirrored, insert them consistently into the vase — either all with the print-plate side facing outward or all facing inward — to achieve a seamless design.

How to Build Your Lamp: Print all the parts you need for your build:

One Modular Vase + Clips Circle Inlays for the Modular Vase Lampshade of your choice Leafs for modular lampshades (if using a modular shade) Then assemble the lamp as follows:

Prepare the Vase: Press-fit the Circle Inlays into the Modular Vase. As the parts are mirrored, make sure all are aligned the same way for a unified pattern.

Add the Clips: Press-fit the clips into the top side of the vase. These will secure the shade later.

Insert the Fixture: Install your chosen lamp fixture (E14, E27, or the Bambu Lab LED Kit). Build the Shade: For modular shades, press-fit the bottom clip through the bottom ring into the first spline, then press the top clip through the top ring into the same spline. Alternate attaching even and odd splines until the shade is complete. Insert the leaf elements into their designated slots by pressing them downward.

Connect Shade and Vase: Position the shade above the vase and gently press it onto the clips. If it feels tight, work your way around pressing in sections until fully seated.

Finish: Place the cable neatly into the slot at the bottom of the vase. Your lamp with the Modular Vase and Circle Inlay is complete!

If you run into any issues during printing or assembly, don’t hesitate to reach out — I’ll be glad to help.