This is the Shade Upwards of the Moduluma Lamp Ecosystem!

The Moduluma Ecosystem is a modular lamp system where vases, shades, inlays, and decorative elements can be freely combined to create countless unique designs. Every part is interchangeable, tool-free, and designed for easy assembly, giving you endless freedom to create lamps that fit your style and space.

The Shade Upwards creates a more open and upward-directed light flow, giving your lamp a modern and elegant look. Its spline-based construction allows you to mix it with different leaf sets for a variety of styles.

How to Print:

Print all parts on the labeled print plates: 6x Spline Even 6x Spline Odd 1x Bottom Ring 1x Top Ring 12x Bottom Ring Clips 12x Top Ring Clips Each part is labeled with numbers for easy identification in the 3mf.

How to Build Your Lamp: Print all the parts you need for your build:

One Vase + Clips Inlays for the Modular Vases (optional) One Lampshade (Shade Upwards in this case) Leafs for the Modular Lampshades (if desired) Then assemble the lamp as follows:

Prepare the Vase: Press-fit the inlays into the Modular Vase (if used). Make sure mirrored parts are all inserted in the same orientation. Insert the Clips: Press-fit the clips into the top side of the vase. Install the Fixture: Insert your chosen lamp fixture (E14, E27, or Bambu Lab LED Kit).

Assemble the Shade: Press-fit the bottom clip through the bottom ring into the first spline. Press-fit the top clip through the top ring into the same spline. Alternate between even and odd splines until the entire shade is built. Add the leaf parts into the designated slots. It’s easiest to insert the leaves by pressing them downward into the shade, so orient the shade accordingly while working. Attach Shade to Vase: Position the shade above the vase and carefully press-fit it onto the clips. If it’s tight, work gradually around the lamp pressing each side down until secure. Finish: Position the cable into the slot at the base of the vase. Your upward-opening lamp is complete!

If you have any questions or issues during assembly, feel free to reach out!