This is the Modular Vase with Leafy Inlay of the Moduluma Lamp Ecosystem!

The Moduluma Ecosystem is a modular lamp system where every part — vases, shades, inlays, and leaf elements — can be combined to create unique lamp designs. Each component is interchangeable, allowing countless variations while keeping the build simple and entirely tool-free.

The Leafy Inlay for the Modular Vase adds an organic, flowing character to your lamp. Its leaf-like structure gives a natural elegance that works beautifully with the more geometric shades or enhances the softness of the modular leaf shades.

How to Print: Print the plate as it is. These inlays are made for the Modular Vase (not the Modular Vase Big). Since parts are mirrored, insert them consistently into the vase — either all with the print-plate side facing outward or all facing inward — to create a clean and unified look.

How to Build Your Lamp: Print all the parts you need for your build:

One Modular Vase + Clips Leafy Inlays for the Modular Vase Lampshade of your choice Leafs for modular lampshades (if using a modular shade) Then assemble the lamp as follows:

Prepare the Vase: Press-fit the Leafy Inlays into the Modular Vase. As the parts are mirrored, make sure they are all aligned in the same orientation for a uniform pattern. Add the Clips: Press-fit the clips into the top side of the vase. These clips will later secure your lampshade. Insert the Fixture: Install your chosen lamp fixture (E14, E27, or the Bambu Lab LED Kit) into the vase. Build the Shade: For modular shades, press-fit the bottom clip through the bottom ring into the first spline, then press the top clip through the top ring into the same spline. Continue attaching even and odd splines alternately until the shade is complete. Then press-fit the decorative leaf elements into their slots, pressing downward for easier assembly. Connect Shade and Vase: Position the shade above the vase and press it gently onto the clips. If the fit is tight, press in sections around the lamp until it is fully seated. Finish: Place the cable neatly into the slot at the bottom of the vase. Your lamp with the Modular Vase and Leafy Inlay is ready! If you have any questions or encounter any difficulties, feel free to reach out — I’ll be happy to help.