This is the Modular Vase Big with Circle Inlay of the Moduluma Lamp Ecosystem!

The Moduluma Ecosystem is a modular lamp system where every part — vases, shades, inlays, and leaf elements — can be combined to create unique lamp designs. Each component is interchangeable, allowing countless variations while keeping the build simple and entirely tool-free.

The Circle Inlay for the Modular Vase Big brings a clean, geometric look to your lamp. The circular pattern contrasts beautifully with the organic curves of the shades, adding structure and rhythm to your design.

How to Print: Print the plate as it is. Make sure you only use these inlays with the Modular Vase Big (they are not compatible with the smaller Modular Vase). Since parts are mirrored, insert them all the same way into the vase — either with the print-plate side facing outward or inward — to create a consistent appearance.

How to Build Your Lamp: Print all the parts you need for your build:

One Modular Vase Big + Clips Circle Inlays for the Modular Vase Big Lampshade of your choice Leafs for modular lampshades (if using a modular shade) Then assemble the lamp as follows:

Prepare the Vase: Press-fit the Circle Inlays into the Modular Vase Big. As the inlay parts are mirrored, make sure to align them consistently (all with the same side facing out).

Add the Clips: Press-fit the clips into the top side of the vase. These clips will later secure your chosen lampshade. Insert the Fixture: Install your chosen lamp fixture (E14, E27, or the Bambu Lab LED Kit) into the vase.

Build the Shade: For modular shades, press-fit the bottom clip through the bottom ring into the first spline, then press the top clip through the top ring into the first spline. Continue alternately attaching even and odd splines until the shade is complete. Finally, press-fit the decorative leaf elements into their slots, pressing them downward for the easiest assembly.

Connect Shade and Vase: Align the shade above the vase and press it onto the clips. If the fit is tight, press down carefully in sections around the lamp until it is fully seated.

Finish: Position the cable neatly into the bottom slot of the vase. Your lamp with the Modular Vase Big and Circle Inlay is ready!

If you have any questions or run into issues, don’t hesitate to reach out — I’ll be happy to help.