PFEIFER | Mini Power Whistle
PFEIFER | Mini Power Whistle
Meet PFEIFER, a tiny but very very powerful pebble-shaped whistle.
It takes only 10g to print and is available in 2 sizes, Regular and Mini, and a variety of tones:
- Regular in mid-tone 2.5KHz
- Regular in high-pitch 4KHz
- Regular in dual tone (2.5KHz + 3.5KHz)
- Mini in high-pitch 4KHz
- Mini in mid-tone 2.5KHz
Our cute rescue dog responds surpisingly well to the 4KHz.
Don't mind the print quality on the pictures. I live in Taiwan (but I'm French.. long story..) and raining season just kicked. It's so humid it's almost impossible to get my prints right.
Anyway... Happy printing!
V2 UPDATE: The keyhole on V1 versions was a bit too small, so was enlarged on V2.
DIMENSIONS (Regular) | W 35 mm x D 15 mm x H 50 mm
DIMENSIONS (Regular) | W 30 mm x D 15 mm x H 36 mm
PRINTING | 30min
All STL files are already oriented properly.
Infill: 20% Wall line count: 2 Resolution: 0.2~0.3mm/layer or less (the bases in the pictures were printed in 0.2mm/layer) Build adhesion type: Brim 4mm Supports: None
PFEIFER | Mini Power Whistle
SAKURA | Scalable Pencil Holder
SYZYGY | Heart Vase, scalable
ARYZ Plus | Pendant light E26/27
CARLA | Table Lamp E14 & E26/27
CAPA | Corner Soap Dish
MINKY | Desktop bin
GRANO | Desktop bin
CALIZ | Woven Table Lamp E14 & E26/27
ORIGAMI STILT | Table Lamp E14, E26, E27 print-in-place
MALLA MINI | Woven Table Lamp E14/26/27
MALLA | Woven Pendant light E26/27
FREYA | Standing Planter Pot
DOLCE | Indoor Planter Pot
NEST | Wicker Tissue Box
DELTA RIDGE | Table lamp E14 & E27 fast-print
KYOTO | Self-Watering Planter
MANDO | paper towel roll holder
DRAPED ELEGANCE | Table Lamp
SAN | Pendant Light E27 & E26 fast print
Looks good! I recommend using a brim at the base to anchor the model strongly to the bed.
Yea, I used a large brim to print them, but my zoffset wasn't that good, retuned it and now I've printed 4 of them without issues.
One of them was muffled though. I cleaned it with a small pipe cleaning brush and a tooth pick with interdental brush. Sound way better, probably some inside stringing.
Nice whistle,easy to produce and fast,,had no issues what so ever..Thanks for sharing!
Glad you like it! Post a picture of your make if you have a minute to spare!
I am not seeing your copyright license on this. I work for a school and we sell 3D prints as part of a fundraiser for our student FBLA chapter. I want to honor copyright, so wanted to check if we could sell models we print.
Hi! I put this model for free, without copyright. So you can sell prints of those whistles if you want. But cannot resell the STL file though!