FREYA | Standing Planter Pot

Add a touch of sophistication and playful charm to your space with the FREYA four-legged planter.

The patterns on the pot come in 4 versions:

• Ribbed
• Fan pattern
• Rocky texture
• Wood texture.

It comes with an internal draining plate to make sure the soil drains properly but keeps getting some water from the underneath the draining plate by capilarity.

Detailed print settings below.

DIMENSIONS (pot) | W 156mm L 156mm x H 170 mm

3D PRINT SETTINGS: For a watertight result, make sure your printer is well calibrated and lubricated. Then, increase the wall line count (perimeter walls) to 3.

POT & LEGS:

• Resolution (layer height): 0.2~0.3 mm or less
• Wall line count (perimeter walls): 2 to 3
• Infill: 15 to 20%
• Build adhesion type: None
• Supports: None

DRAINING MESH PLATE: The draining plate 3D model is full. That's normal. To create the mesh pattern, set the top and bottom layers to 0, to cancel top and bottom faces. Then set the infill pattern of your choice to 20%.